|
| whiskers |
|
||
|
I have a XL AU 1 ute, was just wondering if the leaf rear springs and the front springs are the same on a BA XR6 ute. Any help would be great. thanks
|
||
| Top | |
||
| Disco Frank |
|
|||
|
fronts will swap no issues
rears im not 100% if the BA ute runs a solid axle should fit
_________________ RIP SCOTT |
|||
| Top | |
|||
| Munch |
|
|||
|
solid axle, swaps easily! leafs are leafs... just get yours reset...
_________________ mmmmmmmmmunchy! |
|||
| Top | |
|||
| whiskers |
|
||
|
Sweet as, Cheers guys. Got another one for ya.
i found a lowering kit for a BA XR6. Front king springs (just low, think they call them, not super lows) n 2" blocks for the back. Now thats going to drop the front alot right? Any idea how high the front will be? Thinking that xr6's are already low. Now the 2" blocks aren't going to be enough to level the car, right? So should i go find some xr6 leafs n add the blocks or can i/ should i reset the springs to that extent. lol choices... cheers for the help |
||
| Top | |
||
| Disco Frank |
|
|||
|
lows will be XR height or a tad lower
_________________ RIP SCOTT |
|||
| Top | |
|||
| Munch |
|
|||
|
reset the springs... the lowering blocks are for Jews... not only does the ute sit lower, but so does all the clearances for the under carriage, scrapes harder than Nicko with his hand in the nutella jar!
Reset = $200 max! blocks = waste of money and you'll end up reseting in the end...
_________________ mmmmmmmmmunchy! |
|||
| Top | |
|||
| whiskers |
|
||
|
cheers guys. XR6 height should be perfect. Have to be able to still move the motorbikes around. 3 Bikes, 300kg should still be alright yeh?
|
||
| Top | |
||
| Disco Frank |
|
|||
|
whiskers wrote: cheers guys. XR6 height should be perfect. Have to be able to still move the motorbikes around. 3 Bikes, 300kg should still be alright yeh?
you might want to keep the orginal xr6 hieght then as u said iirc the xr6 springs are rated for 300+kg or so not much more
_________________ RIP SCOTT |
|||
| Top | |
|||
| Mr Man |
|
|||
|
the rear leaf springs fit afaik.
u should be able to find a set of stock XR height springs on www.fordxr6turbo.com i'm sure some of the perth blokes would have lowered their utes and may want to part with the stockers. if not buy some front coils and have your rears reset. XR height is still legal...
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| BAXTC1 |
|
||
|
Interesting reading, as I will be looking at doing this in the next year also, what is involved in resetting the springs?
|
||
| Top | |
||
| Gab1 |
|
|||
|
yes the springs will fit
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 376 guests |
*