|
| ferrie |
|
||
|
hi mate im chasing a set of sports bars for my au xr6 i just brought a genuine 3 piece lid and need the bars to suit i already had genuine sports bars but there the wrong ones
 could u please help me out.josh |
||
| Top | |
||
| snap0964 |
|
|||
|
Hey George, if you get a chance, can you check the no's for the wagon rear leaf springs (whole assy).
From what I've seen EA-ED wagons have slightly different leafs to the EF/EL's, the leaf ends are flat at the side edges, whilst the EF/EL's's leaf ends flare at the side edges. Plus they both have oval front bushes. I've pulled the rear springs from my EF XR wagon, and they look like 5 leaf XG/XH springs, with round front eye bushes. I'm assuming the XG/XH springs are a carry over from at least the XF utes.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| SLO247 |
|
||
|
BEAR80 wrote: Hey papa I'm chasing a set of brake nipples for a ed falcon, are they availiable from ford or am I better of going to a spare parts place or a brake specialist as mine are severely corroded Cheers, bear You shouldn't have any dramas from a good parts mob. Papa Smurf, just after a price on a pump for the washer bottle? To suit EF. |
||
| Top | |
||
| svo_matt |
|
|||
|
Hey George can you still get the washer jets for an eb or do any other models use the same
_________________ ..My fake plant died because I forgot to pretend to water it.. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
BEAR80 wrote: Hey papa I'm chasing a set of brake nipples for an ed falcon, are they availiable from ford or am I better off going to a spare parts place or a brake specialist as mine are severely corroded Cheers, bear They are currently still available, front part number EA 2208 A $13.05 each and rear EA 2A125 A $4.50 each. |
||
| Top | |
||
| Papa Smurf |
|
||
|
ferrie wrote: hi mate im chasing a set of sports bars for my au xr6 i just brought a genuine 3 piece lid and need the bars to suit i already had genuine sports bars but there the wrong ones could u please help me out.josh Are you refering to a UTE hardcover? if so, there is only ONE sports bar and it is the one for a BA. |
||
| Top | |
||
| Papa Smurf |
|
||
|
snap0964 wrote: Hey George, if you get a chance, can you check the no's for the wagon rear leaf springs (whole assy). From what I've seen EA-ED wagons have slightly different leafs to the EF/EL's, the leaf ends are flat at the side edges, whilst the EF/EL's's leaf ends flare at the side edges. Plus they both have oval front bushes. I've pulled the rear springs from my EF XR wagon, and they look like 5 leaf XG/XH springs, with round front eye bushes. I'm assuming the XG/XH springs are a carry over from at least the XF utes. XG/XH/EA/EB/ED/EF/EL/AU XR wagon and ute springs are the same and are still available. They have the round bush. It would appear that you could use BA springs even. The only thing I can see is that there is just spring rate differences and the front eye bush.  That's the best I can find for you. |
||
| Top | |
||
| Papa Smurf |
|
||
|
SLO247 wrote: Papa Smurf, just after a price on a pump for the washer bottle? To suit EF. Still available, part number BAF2 17K624 A $54.00 |
||
| Top | |
||
| Papa Smurf |
|
||
|
svo_matt wrote: Hey George can you still get the washer jets for an eb or do any other models use the same Still available, part number E9JY 17603 A $19.80 each. |
||
| Top | |
||
| BEAR80 |
|
|||
Age: 44 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
Papa Smurf wrote: BEAR80 wrote: Hey papa I'm chasing a set of brake nipples for an ed falcon, are they availiable from ford or am I better off going to a spare parts place or a brake specialist as mine are severely corroded Cheers, bear They are currently still available, front part number EA 2208 A $13.05 each and rear EA 2A125 A $4.50 each. Thanx for that papa, I will check with the ford dealership at wyong to see if they have any Cheers, bear |
|||
| Top | |
|||
| SWC |
|
||
|
Hi George,
Can I get a price on Front Wheel Bearings to suit EF per side, inner, outer bearing and seal, also price on Diff Gasket Main Housing plate rear. Thanks |
||
| Top | |
||
| snap0964 |
|
|||
|
Papa Smurf wrote: snap0964 wrote: Hey George, if you get a chance, can you check the no's for the wagon rear leaf springs (whole assy). From what I've seen EA-ED wagons have slightly different leafs to the EF/EL's, the leaf ends are flat at the side edges, whilst the EF/EL's's leaf ends flare at the side edges. Plus they both have oval front bushes. I've pulled the rear springs from my EF XR wagon, and they look like 5 leaf XG/XH springs, with round front eye bushes. I'm assuming the XG/XH springs are a carry over from at least the XF utes. XG/XH/EA/EB/ED/EF/EL/AU XR wagon and ute springs are the same and are still available. They have the round bush. It would appear that you could use BA springs even. The only thing I can see is that there is just spring rate differences and the front eye bush. That's the best I can find for you.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
SWC wrote: Hi George, Can I get a price on Front Wheel Bearings to suit EF per side, inner, outer bearing and seal, also price on Diff Gasket Main Housing plate rear. Thanks To buy them in a kit form is $62.75 per side, the parts separate come to $56.48 per side,, go figure? The gasket is only serviced for the wagon and it is $13.96, the sedans are listed to use blue silicone. |
||
| Top | |
||
| smee |
|
|||
|
Hi Papa, could you tell me the p/n & price for AU radiator overflow tank & low water level sender, also the head temperature sender at the back please.
|
|||
| Top | |
|||
| fiend |
|
|||
|
Papa Smurf wrote: SWC wrote: Hi George, Can I get a price on Front Wheel Bearings to suit EF per side, inner, outer bearing and seal, also price on Diff Gasket Main Housing plate rear. Thanks To buy them in a kit form is $62.75 per side, the parts separate come to $56.48 per side,, go figure? The gasket is only serviced for the wagon and it is $13.96, the sedans are listed to use blue silicone. Part number for this wagon only gasket please? BTW - SWC, the only difference between wagon and sedan diffs is there is an extra location pin in the sedan model. You could happily drill a small hole in the supplied wagon gasket to fit around this for your sedan application if required. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
