|
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
i have been told to put a twinlight front on a EB i need to change the headlight relay to a 5 pin relay. which i have. and also ad in a diode or something into a factory plug because the twin lights has projector style low beams and so the lows don't cut out when you flick to highs.
is this true? i have pictures of what i grabbed out of a wrecked Fairlane. seeings as they have projector style lights too  which of the blue and yellow things do i use? and will the factory plug be in the loom somewhere on an EB1?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
if your fitting the factory edxr lights..yes..
the yellow one is the one for the headlights |
||
| Top | |
||
| SWC |
|
||
|
Twin lights are plug and play, no special modifications needed.
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
what other twin lights are there? the cheap ugly copies. no thank you lol
where is this plug that the yellow thing goes into. and what does it do?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Not sure if your EB 1 will have the plug or not being earlier than ED which is when the quadlights came out...
If you do... Its under the header tank... Just a std white plug... I've posted these before but I'll do it again... Attachment: Attachment: This shows why you need it and how it works... All it is, is a zero ohm resistor... Which is a wire link... So I hope you didn't pay too much for it because you can make it with a piece of wire and the 2 dollar plug... Can't help you with a photo though... Cheers, Tim
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: what other twin lights are there? the cheap ugly copies. no thank you lol where is this plug that the yellow thing goes into. and what does it do? it goes to a plug in the loom under the header tank, it links the high beam power to the 5th pin on the low beam relay, which powers the low beam globes when you use high beam... if yours has the link plug and the 5th wire in the low beam relay plug, its as simple as adding the diode link and the 5 pin relay, some ea' and eb1 dont have the link in the loom.. here is a thread from when i did the xr light conversion to my old ea... fordmods-technical-documents-diy-f38/fixing-headlight-problem-when-converting-ea-to-xr6-twinlight-t46998.html |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
i just looked. mine doesn't have the plug under the overflow. damn
i paid 5 bucks for 5 of the resistors and 1 5 pin relay. not bad
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
