|
| 87SIlude |
|
||
|
Ok.
I have a ebseries 1 factory manual. Since I've owned it the accelerator pedal has been quite hard to depress compared to other falcons I have driven. When I bought it the cable was s**t so I replaced it with a new one (for a manual) and installed it. The new cable got rid of the poor takeoff (cable was streached to far to adjust it up) but still has a stiff pedal. Is it just my car or have others experianced something similar |
||
| Top | |
||
| EF_96_XR |
|
|||
|
My ef is a little stiff, it never felt stiff until i drove a mates ef and noticed his was alot lighter, but its not mega stiff so i dont wory about it!
_________________ 96 EF XR6 Factory 5 sp, currently in the middle of building a new motor |
|||
| Top | |
|||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
You could try lubricating your throttle body. I might be a lil bit stiff due to age. Just take it off and give it a good clean
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
what comhelp said. clean it and lube up all linkages and pivot points
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| 87SIlude |
|
||
|
Yea I was thinking it would be something like that.
Reckon giving it a hit with wd40 would do it? Also. Should I be lubing the tb side or in the pedal somewhere. Itd be more throttle boddy side hey. |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
yeah the throttle side. Get some throttle body and carby cleaner. Give a nice good clean bath in that and then see what you can use to lubricate it some. Maybe some silicone spray would be better than WD40
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| 87SIlude |
|
||
|
By clean the throttle body you mean the outside right?
Just cleaned the inside up a month ago. I gave it a hit with wd40 and its a little smoother. Can't really do much with a broken arm tho. |
||
| Top | |
||
| Johnson stroker |
|
|||
|
check your pedal box, they tend to foul up a bit, the plastic bush on it may have worn out causing metal on metal, and a heavy pedal. if you can open an dclose the throttle body by hand you would be able to feel how much or little resistance there is on that end of things, if its nice and free, look at the pedal box side of things. you probably will be able to get away without removing it. but I would drop the cable from the TB and see howyour accelerator pedal feels then.
_________________
|
|||
| Top | |
|||
| 87SIlude |
|
||
|
Yea f**k tops idea man.
ill give it a go tomorro. Reckon you can just buy new plastic bushes. |
||
| Top | |
||
| MickEBS |
|
||
|
I found the pedal to be the main culprit too
|
||
| Top | |
||
| 87SIlude |
|
||
|
So what did you replace to fix it?
|
||
| Top | |
||
| MickEBS |
|
||
|
On one of my cars it was actually bent and not pulling the cable straight but on a angle. The other time it was just gunk on the pivots and the last was a frayed cable.
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
I think if the pedal is bushed, they will be the same as the clutch pedal bush. Didn't think about a bent pedal box actually, could be that as well.
_________________
|
|||
| Top | |
|||
| 87SIlude |
|
||
|
Pretty sure its the plastic bushes.
When you press the pedal down it gets pretty rough before the floor. Will check it at a later date tho. Cheers for the help fellas. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 108 guests |
