|
| dylby1 |
|
|||
|
hey guys, i was wondering if its possible, and how hard it would be to do, to have twin exhaust on an NA XR6
i want something like the one on PSIXR 
_________________ 1993 NCII Fairlane |
|||
| Top | |
|||
| SLY EL |
|
|||
Age: 33 Posts: 48 Joined: 30th Jul 2010 Ride: 1996 Ford Fairmont Ghia EL Location: Wollongong |
I do believe it is possible, just have to contact an exhaust place that can do the job of splitting the pipes into 2 pipes to the back, but I do believe there may be some rear bumper modification required.
_________________
|
|||
| Top | |
|||
| XRCIST |
|
|||
|
Not hard at all, cheapest way would be to find a complete catback system from a BF GTP. Remove the original tips and replace with quad tips. I had the exact system on mine about 2 years ago and it sounded really good. Cost was around $300.
You could also use the Redback or Xforce systems (i had the redback after the gtp one) however they are twin 2.5" so you will lose some bottom end torque.
_________________
|
|||
| Top | |
|||
| dylby1 |
|
|||
|
how much would i be looking at for a redback/xforce one?
losing some torque isnt a huge issue, its only driving me to and from work. ill just counter it with something else if i feel the need haha
_________________ 1993 NCII Fairlane |
|||
| Top | |
|||
| XRCIST |
|
|||
|
Ive seen the redback one advertised for as low as $800 online (most exhaust shops will charge $900 to $1000 for it plus fitting) the Xforce is also around the $1000 however it is stainless steel. Not sure how much the mild steel version goes for but i think around $700.
The torque loss is pretty noticeable. Im running a twin 2.25" system now and the car feels much more lively and responsive down low. Then again, i did still manage to run a 14.2 with the twin 2.5s and the sound was much louder and deeper. I will be putting it back on though when i fit my Vortech kit
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
