|
| stevo1210 |
|
||
|
Hi everyone,
I'm new to the forums and I need some help with my brother's falcon that i'm "modifying" for him. I have limited knowledge with Falcon's since I'm a JDM fan who drives Honda Civics and Toyota Corollas LOL. Anyway... His car is an AU series 1 falcon but he wants to change the rear bumper to the one that's on the AU series 2 falcon (The squarer looking one). Is this actually possible to do or are mounting points and everything else different? Thanks. |
||
| Top | |
||
| Benny D |
|
|||
|
i didnt think aus had different shaped bumpers thru the series... not talkin about a BA is he? they are squarer.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
the rear bumpers are slightly different from series 1 to series 2..
i found that out when i went to put mud flaps from a series 1 onto a series 2 and they would not fit.. the bumper was a slightly different shape.... |
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: Hi everyone, His car is an AU series 1 falcon but he wants to change the rear bumper to the one that's on the AU series 2 falcon (The squarer looking one). Is this actually possible to do or are mounting points and everything else different? Thanks. AU sedans have the same mounts to hold on the rear bar throughout the series but use different plastic shields at the end of the bar. |
||
| Top | |
||
| stevo1210 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Hi everyone, His car is an AU series 1 falcon but he wants to change the rear bumper to the one that's on the AU series 2 falcon (The squarer looking one). Is this actually possible to do or are mounting points and everything else different? Thanks. AU sedans have the same mounts to hold on the rear bar throughout the series but use different plastic shields at the end of the bar. What's the plastic shield bit? If I was to put a new bumper on, would I also need new plastic guards that are inside the wheel well? (just a thought since the shape is different) |
||
| Top | |
||
| stevo1210 |
|
||
|
Wait. My bad, I'm thinking about the front bumper with the inner plastic guards... DOH!
Anyway, now that I know to an extent that the mounts are the same... are there any modifications that I will need to do before fitting a series II bumper bar on? Thanks. |
||
| Top | |
||
| stevo1210 |
|
||
|
Well after some sifting around on the net, I managed to track down a few vehicles which also have a Series II rear bar on a series I.
Here's an example. Before: With AUI rear bar  After: With AUII rear bar (notice how it doesn't scoop upwards in the back as much as the latter) 
|
||
| Top | |
||
| Benny D |
|
|||
|
ahh i see wat you mean.
doesnt suit the rest of the car that is curved.. at first glance it looked like somthin off a vt commo. lol.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| au055 |
|
||
Age: 69 Posts: 167 Joined: 3rd Jul 2009 Ride: 2002 AU Fairlane Sportsman Location: Narellan |
Hi guys, I have an AU series 2 Fairlane and I am looking at some aftermarket bars for the front and back similar to the Hawk or TS50 series that are on E-Bay. Can anyone tell me if the Falcon bars and mounts are the same as the Fairlane please. The standard bars on my Fairlane look pretty plain so I want to improve the look. Cheers AU055
|
||
| Top | |
||
| 67RCE |
|
||
|
{USERNAME} wrote: Hi guys, I have an AU series 2 Fairlane and I am looking at some aftermarket bars for the front and back similar to the Hawk or TS50 series that are on E-Bay. Can anyone tell me if the Falcon bars and mounts are the same as the Fairlane please. The standard bars on my Fairlane look pretty plain so I want to improve the look. Cheers AU055 No aftermarket bars will fit a Fairlane. Try find (good luck!) a TL50 lower lip
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Benny D |
|
|||
|
good luck i rekon. lol.
Wasnt there only like 3 of them made? one for the ford boss. One for lowndsie and one to a guy that orderd it?
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| stevo1210 |
|
||
|
{USERNAME} wrote: ahh i see wat you mean. doesnt suit the rest of the car that is curved.. at first glance it looked like somthin off a vt commo. lol. It still has a slight curve, but it isn't as curved as the original one i guess. different tastes i guess. but my brother wanted to cover that exhaust pipe more importantly and also reduce that "curve" where the back wheels were since it looks like the wheels are poking out of the car. |
||
| Top | |
||
| fourL6 |
|
|||
|
{USERNAME} wrote: good luck i rekon. lol. Wasnt there only like 3 of them made? one for the ford boss. One for lowndsie and one to a guy that orderd it? that was only series 3 TL50s 43 series 1s 12 series 2s 3 series 3s "au055" a TL50 grill will improve the look of your fairlane a lot more than the lower lip... {DESCRIPTION} Cheers Cam
_________________ Was - {DESCRIPTION} |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
