|
| krisisdog |
|
|||
|
Okay I've got some extra wires after replacing the injector loom in an EL 6cyl:
 Anyone know what they are for and where they go? |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Anyone??
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Lovely shade of pink.
Zoom out on the pic so we can see better the surrounding area, also more detail - what happened, you replaced a whole engine loom?? I'm not you, I can't see the whole picture through your eyes. From memory, the injector loom goes to the square harness connector near nos 5 & 6 injectors - different plug arrangement than to EF's and earlier. Might sound like strange requests, but I can't give an answer unless I know more.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Can do.
I had to replace the injector loom as the car had an aftermarket computer in it and they rewired nearly everything. PITA. I got hold of a loom from a wrecked car, and popped out the pins and put them into the original square plug as it still had some for the trans. These are the ones left over that I cant place yet. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
for turning ya car gay when required
shrt all 3 together and car = gay other than that nooooo idea!
_________________ RIP SCOTT |
|||
| Top | |
|||
| snap0964 |
|
|||
|
krisisdog wrote: Can do. If you could that would be great - I can then look at the EL diagrams and figure it out - shouldn't be hard.
I had to replace the injector loom as the car had an aftermarket computer in it and they rewired nearly everything. PITA. I got hold of a loom from a wrecked car, and popped out the pins and put them into the original square plug as it still had some for the trans. These are the ones left over that I cant place yet.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Righto I know what they are, I just need to know the pinout on the loom plug.
They are from the injectors, and the ISC unit. I'm thinking they are all 12v? |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
