Fordmods Logo

351 into ed 

 

Page 1 of 1 [ 14 posts ] 

 
 Post subject: 351 into ed
Posted: Fri Jan 14, 2011 9:57 pm 
Fordmods Newbie
Offline

Posts: 18

Joined: 26th Apr 2009

Location: Melbourne s.e.
VIC, Australia

Hey guys just wondering how hard it is to fit a 351 windsor into an ed I'll be running straight gas so emissions in vic at least aren't a problem just gotta run cats.

But yeah how hard is it to stick a 351 into a ed.
Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Fri Jan 14, 2011 10:47 pm 
Smokin em up
Offline

Age: 53

Posts: 221

Joined: 7th Jan 2006

Gallery: 2 images

Ride: F150 EL mont&2001 cobra

Location: Innisfail
QLD, Australia

{USERNAME} wrote:
I was told it was quite straight forward.

Only issue I think is the in/out on the radiator is on the wrong sides.

I think you should delete that last line the rest is correct.

 

_________________

Smoken the hides in top gear

Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Fri Jan 14, 2011 10:52 pm 
Getting Side Ways
Offline

Age: 32

Posts: 510

Joined: 8th Aug 2010

Gallery: 9 images

Ride: NF Fairlane Ghia

How Hard Is It To Stick A 351C Into A NF ?

Just Curious As I Imagine It Would Be Harder For A Cleveland

 

_________________

NF Fairlane Ghia, Brand New Leather Interior, Wallnut All Through, 800W RMS JL Audio Sound System, Lowered King Springs And Monroe GT Shocks, Custom BA/GT Air Intake, Holley Highflow, Simmons B45's, Going To Be Supercharged At 9-12psi With Stage 4 Head And Cam With Pacemakers And 3" Exhaust

Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Fri Jan 14, 2011 11:04 pm 
Smokin em up
Offline

Age: 53

Posts: 221

Joined: 7th Jan 2006

Gallery: 2 images

Ride: F150 EL mont&2001 cobra

Location: Innisfail
QLD, Australia

The V8 e series have a hard metal pipe to run the coolant from the passenger side too the drivers side on the bottom hose.
What engine did your ED leave the factory with?

 

_________________

Smoken the hides in top gear

Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Fri Jan 14, 2011 11:09 pm 
Smokin em up
Offline

Age: 53

Posts: 221

Joined: 7th Jan 2006

Gallery: 2 images

Ride: F150 EL mont&2001 cobra

Location: Innisfail
QLD, Australia

{USERNAME} wrote:
How Hard Is It To Stick A 351C Into A NF ?

Just Curious As I Imagine It Would Be Harder For A Cleveland

Engine mounts have the same bolt spacing for a Windsor and cleveland and the bell housing is the same pattern the only problem will be the exhaust.

 

_________________

Smoken the hides in top gear

Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Sat Jan 15, 2011 11:47 am 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

Both fit but only one would be legal..

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Sat Jan 15, 2011 3:31 pm 
Fordmods Newbie
Offline

Posts: 18

Joined: 26th Apr 2009

Location: Melbourne s.e.
VIC, Australia

It's a xr8 so no issues with mounts etc.. the motor is gone thats why I wanna stick a 351 in it I wanna run straight gas like I said for emissions and less headaches with computers etc..

I haven't got the cash right now but how hard is to stick a blower onto it with straight gas.
Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Sat Jan 15, 2011 5:49 pm 
Smokin em up
Offline

Age: 53

Posts: 221

Joined: 7th Jan 2006

Gallery: 2 images

Ride: F150 EL mont&2001 cobra

Location: Innisfail
QLD, Australia

That makes life much easier.
You should be able to get it emission compliant on petrol with a 351 windsor but I don't know the rules in Victoria.

 

_________________

Smoken the hides in top gear

Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Sat Jan 15, 2011 9:17 pm 
Fordmods Newbie
Offline

Posts: 18

Joined: 26th Apr 2009

Location: Melbourne s.e.
VIC, Australia

Yeah I'm not too savvy with computers so I'll just stick to the gas I had a esp 10 years ago with a 351 clevo on straight gas made 400hp no probs and I know gas well.
Just gotta figure out what to do for an ignition system I was looking at those ford racing crate motors looks like they come with a dizzy so just gotta find out if it'll run gas cause the compression ratio is perfect for gas 10.5:1 is ideal for gas and thats what some of their motors run.
Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Mon Jan 17, 2011 12:09 am 
EFI Guru
Offline

Age: 59

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Top
 Profile  
 
 
 Post subject: Re: 351 into ed
Posted: Tue Jan 18, 2011 1:34 am 
Getting Side Ways
Offline
User avatar

Posts: 636

Joined: 21st Nov 2008

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
http://www.perthfalcons.com.au/index.php?showtopic=1866


very nice.
351w should have been standard or at least an option in the XR8s back then.
from the few builds iv read that have done it, the only problem seems to be the headers, then you have to deal with engineers and the mind numbing rta.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 14 posts ] 

Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 25, 2024 12:34 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names