|
| Futuraclassic |
|
||
|
as stated on subject, i have aquired a woodgrain t bar surround from evil bay and i want to install it. now on my ef it was a pull out and replace job. as this car is new to me, how do i pull this one out???? seems like i may have to undo a few bolts or something but am i correct??? i have looked around but couldnt find anything on the subject. please let me know what i have to do to remove the surround, cheers guys
_________________ People hate the au series but i wouldnt have it any other way!!! |
||
| Top | |
||
| fourL6 |
|
|||
|
Futuraclassic wrote: as stated on subject, i have aquired a woodgrain t bar surround from evil bay and i want to install it. now on my ef it was a pull out and replace job. as this car is new to me, how do i pull this one out???? seems like i may have to undo a few bolts or something but am i correct??? i have looked around but couldnt find anything on the subject. please let me know what i have to do to remove the surround, cheers guys looks like you have to remove the center console, which is 2 screws at the back of the center console into the floor, 2 under the drink holder and 2 under the coin holder bit just infront of the auto, not sure what else as i have a manual...
_________________ Was - 2001 AUIII Ford Falcon Forte |
|||
| Top | |
|||
| Futuraclassic |
|
||
|
ok well i guess ill see if that works but its just so much of a stuff around compared to ef el models. does anyone else know if this is how its done?
_________________ People hate the au series but i wouldnt have it any other way!!! |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
as mentioned is correct........ ive seen a few pics from other members with the centre console removed when changing shifters & shifter surround
|
||
| Top | |
||
| Futuraclassic |
|
||
|
ok great thanks for the help guys, what a pain ford are. always changing stuff. i had to import a 5 pointed star torx set just to swap my s.wheel on the au. The ef was a normal torx. lol.
_________________ People hate the au series but i wouldnt have it any other way!!! |
||
| Top | |
||
| low_ryda |
|
|||
|
ah the good old 5 pointed security screw......... i got stung with that in my au, funny thing is the bf has a standard 6 point.... thanks ford
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| Futuraclassic |
|
||
|
low_ryda wrote: ah the good old 5 pointed security screw......... i got stung with that in my au, funny thing is the bf has a standard 6 point.... thanks ford yeh bloody ford and their little suprises, sometimes i really get the s**t lol
_________________ People hate the au series but i wouldnt have it any other way!!! |
||
| Top | |
||
| Futuraclassic |
|
||
|
Ash wrote: Did you get it done? Once you get the console out, you just need to unclip the 4 clips that hold the auto shifter surround to the shifter assembly that bolts to the floor. Then unclip the globe from the shifter surround. Reverse to install  yes i did if you see my introduction post you can see that i have put quite a bit in since i bought the car just over a month ago. new cat back sports exhaust i got for free when i discovered the old one was bogged for a roadworthy. i hit the guy i bought it from for a new one and he payed. new steering wheel from an au xr new momo shifter, woodgrain surround and i put some of my own blue globes into the dash the surround and footwells. i have just purchased a j3 chip and an xr8 bf gt pod box and a special scoop from ebay that forces air into the snorkel. so i have been busy.
_________________ People hate the au series but i wouldnt have it any other way!!! |
||
| Top | |
||
| ea_silver_ghia |
|
|||
Age: 40 Posts: 157 Joined: 21st Jul 2005 Ride: EAII Ghia & AUII Fairmont Location: South Oakleigh |
I've found the AU has been weird to mod after all this work I've done on the EA. To fit chrome interior door handles meant I had to remove the door trims. To change the shifter surround meant I had to pull out the console, and as for when I fitted my EL GT steering wheel, I know what you mean about the bloody 5 pointed torx bit!
_________________ 1990 EAII Fairmont Ghia |
|||
| Top | |
|||
| Futuraclassic |
|
||
|
ea_silver_ghia wrote: I've found the AU has been weird to mod after all this work I've done on the EA. To fit chrome interior door handles meant I had to remove the door trims. To change the shifter surround meant I had to pull out the console, and as for when I fitted my EL GT steering wheel, I know what you mean about the bloody 5 pointed torx bit! and then for ford to just go back to the normal torx again is stupid. yes, i was a little intimdated with the door cards at first seein ef ones were easy as. i will never know why ford changed nearly nothing froem ea to el then au was all weird and s**t
_________________ People hate the au series but i wouldnt have it any other way!!! |
||
| Top | |
||
| phatba |
|
||
|
if you think au's are bad, dont touch an fg. from the b series to the f series everything has gone torx bolts. you need torx drivers to remove your door tim, the speakers, hell you even need them to open the air cleaner to change the filter!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 70 guests |
