|
| Interceptor |
|
||
|
{USERNAME} wrote: ok i have bulb holders now with about 2 cm of wire now all i need to do is get the wire, i was just wondering if 3mm 10 Amp wire will do both earth and live?
dude..... you're just f******g scary....... are you sure you should be touching anything on the car other than the keys, steering wheel and *maybe* the fuel filler?? (remember, fill up with unleaded) oh, and dont forget, electricity only flows in one direction, so make sure you get both red AND black wire..... otherwise the lights wont work, and your car might catch fire too........ lol
_________________ Banned |
||
| Top | |
||
| stixinc |
|
|||
|
which one of the three connectors do i plug into and how? (centre console lamp, i want it to come on when the door is opened and i dont have a ign light thing)
|
|||
| Top | |
|||
| twirqurky |
|
||
|
{USERNAME} wrote: which one of the three connectors do i plug into and how? (centre console lamp, i want it to come on when the door is opened and i dont have a ign light thing)
read the doco Its all in there. FRead it a few times and it is all in there. |
||
| Top | |
||
| stixinc |
|
|||
|
i have read the doco but i tried the connectors under there but none of them worked and there is 2 8 pin-connectors there i could use and the doco doesnt explain how to put the wires into the connector or which exact connector to use.
|
|||
| Top | |
|||
| 6CYL |
|
|||
|
Which wires do you use to add a centre console lamp for AU Series 1. I opened the centre console but didn't reconginse which wires to use.
|
|||
| Top | |
|||
| twirqurky |
|
||
|
{USERNAME} wrote: i have read the doco but i tried the connectors under there but none of them worked and there is 2 8 pin-connectors there i could use and the doco doesnt explain how to put the wires into the connector or which exact connector to use.
What? Are we talking about putting the lamps under the glovebox, steering wheel and under the centre console. |
||
| Top | |
||
| stixinc |
|
|||
|
well you see because you have a futura you wire it up in the steering column but because i have a pov pack (gli) i have to wire it into a connector.
Ok so now it works but it will not turn off unless car is on ACC. How do i fix this? |
|||
| Top | |
|||
| twirqurky |
|
||
|
{USERNAME} wrote: well you see because you have a futura you wire it up in the steering column but because i have a pov pack (gli) i have to wire it into a connector.
Ok so now it works but it will not turn off unless car is on ACC. How do i fix this? The lights stay on stay on until ACC is selected or the car is turned on. The Futura BEM (mid series or high series, I think Mid) has a fade out feature. The GLi just turns off after a while. But if its staying on a little while thats what you want. If its staying on for ages, check that a door isnt open and that you havent left your interior lights on. |
||
| Top | |
||
| Spider_GT |
|
|||
|
Quick Question
ED & EL Wiring for the footwell lights the same if so ill just slice them off my ED Fairmont Loom |
|||
| Top | |
|||
| stixinc |
|
|||
|
ok the door was closed but i had the wires in the wrong connector but now i have it working well.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Majestic-12 [Bot] and 29 guests |
