|
| XFWAGON |
|
|||
|
Oh and i'm looking at the Walbro pumps, do the Mustang Walbro's fit our Falcon hangers? And i'm guessing that a 190lph will be sufficient for the 24lb injectors.
I bought some Ford Racing M-9593-AA302 injectors, they are 24lb flow matched to within .5-1% of each other, which for my application doesn't matter, but they were a nice price and have the EV1 plug to fit the E series harness. |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I think at 100 I'm sitting at around 2200rpm. I can't remember to be honest, as I haven't driven it in so long!
Not too sure about the Mustang fuel pump. I can't remember the model number of my Walbro. I had to buy it in a hurry locally as mine died and I needed the car the next day to get to work. I'm pretty sure the 190lph has enough oomph to feed the 24lbers.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Yep they fit.
|
||
| Top | |
||
| XFWAGON |
|
|||
|
{USERNAME} wrote: I think at 100 I'm sitting at around 2200rpm. I can't remember to be honest, as I haven't driven it in so long! Not too sure about the Mustang fuel pump. I can't remember the model number of my Walbro. I had to buy it in a hurry locally as mine died and I needed the car the next day to get to work. I'm pretty sure the 190lph has enough oomph to feed the 24lbers. That's pretty good, currently i sit at 2000 at 100 with my 3.27 diff. Where did you get your 3.73's from, what car? {USERNAME} wrote: Yep they fit. Excellent, another item to tick off the list. |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I bought my gears new when I had my lsd rebuilt about 4 years ago now.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
{USERNAME} wrote: I bought my gears new when I had my lsd rebuilt about 4 years ago now. Are there a specific brand/make to buy? I know the Borg Warner gears are the ones to get, but obviously can't buy them new. Well not that i know of. Did you get them from Ford Racing? As i see they have kits in that ratio. I was looking at them but I'm unsure if they will fit my diff. |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I left it to the workshop who did the work. Nothing will be available from Ford Racing to suit our diffs. The BW78s are probably one of the hardest models to get decent bits for and when you find them, they cost a mint!
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
