|
| Chargd |
|
|||
|
hey guys, the black strips on my doors are starting to fall off, just wondering if anyone has a picture of there ef/l without them on? wanna see how it looks, also what would i use to put back on to the door if i decide too? thanks in advance
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| bry40l |
|
|||
|
some cars look good with them all removed they are held on with double sided tape, to remove the double sided tape i used wd40 to losen the glue or wax and grease remover, sometimes wd40 works better than wax and grease remover my car is white and i removed the fairmont strips i think the fordmods gallery have some pics of it in there ill post the link here
_________________ BF XR6 |
|||
| Top | |
|||
| bry40l |
|
|||
|
{DESCRIPTION}
_________________ BF XR6 |
|||
| Top | |
|||
| Chargd |
|
|||
|
my car is heritage green, i think im going to just remove them, mine are glued on, also is it easy to remove the bits in the bumper bars? and are they just stuck on also?
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| Johnny C |
|
||
|
i dont have any pics sorry, but on my EF XR8, they all turned pink so had them sprayed in body colour (gun barrel grey) and had some lightning strike colour stripes added along the lower section of the car. looked beast.
|
||
| Top | |
||
| bry40l |
|
|||
|
Nar they arent just stuck onto the bumper if youtake them out it it will leave a indent thats ugly all round the bumper
_________________ BF XR6 |
|||
| Top | |
|||
| madmax |
|
|||
|
On my EL I had the stuck on with Urethane and double sided tape. Double sided table top and bottom with a generous bead of urethane in the middle.
The double sided tape is there to hold them in place while the urethane goes off. In later years when the double side tape fails the urethane still holds them on. This was a tip from a panel beater
_________________
|
|||
| Top | |
|||
| Chargd |
|
|||
|
decided to just remove the ones off the door at this stage, thinking i might paint them or something later on and put them back on
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| R3ject |
|
||
|
I have a falcon futura classic with the black and red stripe through it. Im thinking on respraying it white and adding a grew/silver strip. Would i be best off removing it from the door and put it back on or just place BULK tape and paper around it ??? I would probs have to sand it first right?
|
||
| Top | |
||
| dazza027 |
|
||
|
Do it properly. Remove them from the car. Overspray is a b**ch and so is masking up doors.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
