|
| EL___Fairmont |
|
|||
|
WILDEB wrote: i always just fill it to where the two halves join. never had a problem exactly the same as what I do when replacing the coolant
_________________ Current ride 2007 |
|||
| Top | |
|||
| madmax |
|
|||
|
EL___Fairmont wrote: madmax wrote: You shouldn't fill it to the 'max' line when cold. Even with a new cap these engines will expel water out of the cap once they get to operating temp. The header tank should sit at 'min' when cold to allow for this expansion The "MAX" line on the header tank is for a cold refill, Ford would have marked it otherwise like the tranny dipstick or pwr str dipstick which have hot/cold levels. I can only tell you from my experience with my EA, EL and BA that they all expel excess water out of the cap, new or old if filled to the 'Max' line when cold. I fill them to just over the 'min' line and and when hot it rises up to the 'max' line.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 80 guests |
