|
EB92 |
|
|||
|
{USERNAME} wrote: pretty sure centre bore size is different That was my main concern. In this regard, I wouldn't feel confident buying a set of wheels that I couldn't test fit to make sure. |
|||
Top | |
67RCE |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: pretty sure centre bore size is different That was my main concern. In this regard, I wouldn't feel confident buying a set of wheels that I couldn't test fit to make sure. when funds allow, I'm putting a set of Koya Drifteks on my AU, 17x9's on the front in a +35 offset, and 17x9.5's on the rear with a +18 offset, they need a 1mm spacer to sit flush on the hub
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
madeaspack |
|
||
|
iv got 18's from a skyline on mine,unsure what the offset is,but with 245's the tires just touched the guards at all 4 corners,235's are fine
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
Top | |
md1411 |
|
||
|
Hi,
just wanting to know if stud pattern and pcd of a skyline r34 and hilux 2005 2x4 will fit a , AU. I know hilux are 5 x 114.3 with pcd +35. I am looking at buying some wheels with tyres . They are 245/45/17 Tyres are 17 x 8.1.1 Does anyone know if these will fit ta |
||
Top | |
67RCE |
|
||
|
{USERNAME} wrote: For AU+, you can run up to 9" on the original offset, if you went to +20 and a 10" rim, you'll have an inch or so of rim sticking out of the guard. I know this thread is now 2 years old, but it's a good place to post this - an 18 x 10 -1 offset rim will JUST fit under the rear on an AU. I should have taken pics!!!!
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 17 guests |