|
| Ducatiman |
|
||
|
Hi all, a friend of mine has just goten a EB Ford Falcon 4.0ltr Auto, the starter motor in it was dead so thay have put a new one in it from the wreckers, now when the key is turned the starter motor spins and makes a ticking sound but dusnt engage the motor, my thorts on this is that thay havnt lined the startor up proply when installing but i could be wrong, what do you guys think it could be? hope to have a reply any help would be good
 . Best regards Duke H. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
another dodgy starter i reckon
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| mreb |
|
|||
|
bad earth or battery connections possibly
|
|||
| Top | |
|||
| TimmyA |
|
|||
|
two bolts hold it in mate... you'd find it almighty hard to get "out of alignment"...
if it ticks it sound like the solenoid ticking as though you have a flat battery or dirty connections... If not I'd would suspect a wrong starter (came from a different vehicle) or a dead starter motor... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| 93eb wagon |
|
||
|
yer mine does it heaps but i put a xf 1 in my eb i just wait till it stops spining and go again then its fine
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 69 guests |
