|
mountainboi |
|
||
|
Hey Fella's
The 302 Windsor engine that powers the 93 & 94 Mustang, is this the same engine in the 95 Falcon?? Cheers |
||
Top | |
mountainboi |
|
||
|
So just to confirm in the 95 Falcon is the 93' 302 windsor V8
|
||
Top | |
mountainboi |
|
||
|
Under drive pulley system, and what's the little gadget connected after the pod filter, apparently it restricts the airflow, and Im kinda hoping to find a secondhand mustang one that will give you the same diameter pipe all the way through
|
||
Top | |
fairlane6970 |
|
|||
|
I bought one70mm MAF (Mass Air Flow) from the states for my NF 5.0 for about $65 US it has a slip on fitting at both ends - doesn't bolt to air box so is ideal for pod or modify to suit airbox as I did. Just make sure it has the right shaped plug.
Attachment:
_________________
|
|||
Top | |
mountainboi |
|
||
|
Cheers Mate
The measurement for the MAF where is that taken from? is an internal measurement or external? |
||
Top | |
Johnson stroker |
|
|||
|
ID mate.
_________________
|
|||
Top | |
Scaffy |
|
|||
|
You'd probably be better off trying to get hold of an AU MAF housing and bolt that up to your airbox with your stock electrics in it. Put a K&N panel filter in there and cut the front out of your airbox so it gets the cold air from behind the headlights.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
Top | |
fairlane6970 |
|
|||
|
That's the poiny here I think, with the OZ dollar so high it's pretty cheap from the US and those AU ones aint cheap either and the plug is different too is it not?
_________________
|
|||
Top | |
Scaffy |
|
|||
|
Well, the OP is in NZ, so I don't know how their $ is compared to the US$.
You don't need the AU electrics, just the housing and bolt the stock electrics back in.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
Top | |
XR9UTE |
|
||
|
'93 is actually different to '94.
'86 to '93 has a different front dress to ours but the base engine is basically the same as ours. The '94-'95 has a front dress similar(but not identical) to ours but the intake manifold is different. The base 5.0 HO engine in all cases shares the same 55mm MAF. If it's a Cobra it has a 70mm MAF like the one fairlane6970 has shown in his pic. This is the same MAF used on the EB GT,ED sprint and ELGT but Ford cast up an adaptor flange to fit it to the stock airbox. |
||
Top | |
mountainboi |
|
||
|
Cheers Guys
Awesome info....waiting on some quotes for under drive pulleys from the US....freights going to be a killer and yup paying in kiwi's, they wont take sheep or cows neither..... So do you think I would find a 70mm MAF in an ozzie wrecking yard?? |
||
Top | |
XR9UTE |
|
||
|
{USERNAME} wrote: Cheers Guys Awesome info....waiting on some quotes for under drive pulleys from the US....freights going to be a killer and yup paying in kiwi's, they wont take sheep or cows neither..... So do you think I would find a 70mm MAF in an ozzie wrecking yard?? Get a set from bpt. They definitely fit and they work right. AU Maf's are all over the place so yes. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 36 guests |