|
| Olive Xm |
|
|||
|
I am changing from the bench seat to buckets in the XT, and I have found that I need spacers under all four legs of each seat dose anyone know the height of the smaller spacers so I can make them?
This is the larger one but there are three smaller ones for the other legs. http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 845wt_1139 |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Just ran out to the shed - puff puff! - they are just shy of 12mm thick
_________________
|
|||
| Top | |
|||
| Olive Xm |
|
|||
|
Thanks for the help.
On Ebay there are these spacers do I need these what do they do? http://cgi.ebay.com.au/XR-XY-bucket-sea ... _536wt_905 |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
you use a combination of these or you can just use lotsa little ones! one side front has a little one and the rear uses more esp right next to hump
_________________
|
|||
| Top | |
|||
| Olive Xm |
|
|||
|
I was lead to believe that I needed three of the smaller ones, two for front, one for outer rear and the 45mm one for the inner rear?
|
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Sounds about right but three little ones is the same as one big one or thereabouts, I never saw a big one like those till a few years ago! might be later model ones that do the same job.
_________________
|
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Olive Xm wrote: Thanks for the help. On Ebay there are these spacers do I need these what do they do? http://cgi.ebay.com.au/XR-XY-bucket-sea ... _536wt_905 Doh! missed that post they from front to rear seat bolts to add a bit of strength not really a spacer.
_________________
|
|||
| Top | |
|||
| Olive Xm |
|
|||
|
I will make three 12mm and a 45mm tomorrow and see how the seat sits.
Thanks |
|||
| Top | |
|||
| Olive Xm |
|
|||
|
Ok
I made three 12mm spacers. Two for front bolts, one for outer rear and the 45mm one for the inner rear they worked great. And a thanks goes out to Fairlane6970 |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
F**k It really had me thinkin' had to set the way back machine eh!
 Glad it's all sorted!
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 49 guests |
