I have a RGB converter and i can't get the screen to flick over to my video input.
I have got the RED BLUE and GREEN video wires hooked up.
I also i have a Sync wire hooked up and i have the ground hooked up.

Which is all the wires that are there to run to the screen for the converter.
There is a power and earth wire to the unit which is hooked up and the light turn on.

In the manual it says to flick the switch to get the screen to come but it doesn't seem to do anything like the sync wire is not working.

Any help would be great thank in advanced.

Wazza

You need to short Pins 2 and 9 together on the ICC plug to get the external input display.

Thank you worked perfect i just had to put a switch on the wire so its not on all the time witch is fine.
meaning i can now toggle between DVD and air/con display.
Without the switch it would just always stay on DVD.

Wazza

It will pop up the normal display as an overlay for a few seconds if you do anything on the ICC.

Yea that's Right