|
edfairmont4.0 |
|
|||
|
ok so I have done the usual things, Tyres, Wheel balance (Twice) etc
doing 90 or over my car shakes (the steering has some shudder) I can see the shifter shaking and feel the shaking through my seat... What could be the causes...??? Thanks in advance.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
Top | |
TimmyA |
|
|||
|
it is only speed related and not rev related?
If it does it a common rev point it can be the harmonic balancer... If it is speed its post the gearbox... so tailshaft is still balanced? Other than that really only wheels that need balancing... Rim aren't buckled? Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
Top | |
fiftyone |
|
|||
|
gearbox hasn't been out before? torque converter might be starting to throw bolts out
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
Top | |
edfairmont4.0 |
|
|||
|
thanks for the reply fellas...
nah its not rev related... Either gear its in its the same... When you go above 90 shakey shakey seems till you go above 125km its gone.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
Top | |
izedso |
|
|||
|
||||
Top | |
BenJ |
|
||
|
I agree with 'izedso'. Get an Auto Transmission shop to check out the extension housing bush.
Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
Top | |
phatba |
|
||
|
possibly loose engine mount?
|
||
Top | |
Jewels |
|
||
|
Had the same problem with mine, my disks were warped and brake pads almose bare, I know it sounds simple, but changing the disks, rotors and pads (as well as brake fluid and hoses) all gone now
|
||
Top | |
locknut |
|
|||
|
Tyre weights stuck on with dbl sided tape? Any missing? I had 4 trips to biggest tyre seller in the country to get my wheels balanced. As soon as the car got to 70km/h, BANG! under the car, one of the weights would've come off and bounce from the chassis to the road and the balance was gone.. Went to Jax, and problem is gone.
|
|||
Top | |
Thomas123 |
|
||
|
new bearings in the front stopped the shuddering i got at highway speeds.
if your wheels were out of balance before it's likely the bearings suffered. |
||
Top | |
edfairmont4.0 |
|
|||
|
thanks fellas, well turns out a few contributors, my NEW balljoints were flogged out about 4-5mm play, tyres out of round, and tie rods were borderline!
so now its got new tyres, new bearings new upper and lower ball joints, new tie rods, new rack ends, balanced, new dba slotters , it drives well now lol
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 43 guests |