|
Joey_EB |
|
|||
|
hey guys,
im new to this so bare with me, ill try my best =). i have connected up an innovate LM-1 and LMA-3 to my eb fairmont, i got AFR, RPM, MAP, and water temp working right, but i am getting a a weird reading for the TPS. ive just spliced and connected a wire to terminal 47 of the wiring loom, and ran it straight to the lma-3. and all im getting is a constant 0.03v - 0.04v reading. i was told that it should be around 4.4v Wide Open Throttle and 0.7V closed throttle? not sure what i am doing wrong. for the speed sensor, i am under the impression that it is a 10v square wave signal. is their a way to connect this to the lma-3. has anybody else tried this? any help would be appreciated, cheers, joe
_________________ EB2 Fairmont... TI Performance j3 chip tuned by me, stage 2 camtech cam, freshened up bottom end, genie extractors, 2.5" system, t5 box, 19" bf cobra wheels... 14.74@94.75mph |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 26 guests |