|
| trentk |
|
||
|
So I was desso on the weekend and had a car full of mates and when i went over bumps at like 60 or above It sounded like the rear wheels where rubbing. I had a look and the inside part of the guard was clean like it had been rubbed. The car is stock hight with 20's but if its rubbing now I can't lower it
 Anyone dealt with this? Any Tips? Thanks |
||
| Top | |
||
| bry40l |
|
|||
|
Get the gaurds rolled,
_________________ BF XR6 |
|||
| Top | |
|||
| low_ryda |
|
|||
|
tail shafts can rub to....
lowering is always a trade off with comfort, to be done properly you need to toughen up the suspension to stop it scrubbing it out, usually making it a pig to drive daily.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| the sam |
|
||
|
Im running superlows with 20s and 235s and mine barely rubs full car. check your offset and as said roll your guards. Plus check the clearance between the upper ball joint mount and the front tyre. You may find you will need to angle grind this bracket slightly to stop the rub at the front. Are you running wheel spacers?
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| trentk |
|
||
|
Okay well looks like I need to roll my guards. Should I do it myself or get it done by a pro?
Oh and I don't have spaces its all stock except wheels. Keen to get the 20's back on I'm currently bogan spec 20's up front stockies out back:) |
||
| Top | |
||
| phongus |
|
|||
|
trentk wrote: Okay well looks like I need to roll my guards. Should I do it myself or get it done by a pro? Oh and I don't have spaces its all stock except wheels. Keen to get the 20's back on I'm currently bogan spec 20's up front stockies out back:) ...do you know what spacers are?
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| trentk |
|
||
|
phongus wrote: trentk wrote: Okay well looks like I need to roll my guards. Should I do it myself or get it done by a pro? Oh and I don't have spaces its all stock except wheels. Keen to get the 20's back on I'm currently bogan spec 20's up front stockies out back:) ...do you know what spacers are? Aren't they used to push the wheels out? |
||
| Top | |
||
| the sam |
|
||
|
Yes and you will most likely be running the spacers as i dont know of any 20" pre-au offset wheels.
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| trentk |
|
||
|
the sam wrote: Yes and you will most likely be running the spacers as i dont know of any 20" pre-au offset wheels. It's a 2002 au |
||
| Top | |
||
| the sam |
|
||
|
Reading would also help...
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 81 guests |
