|
| Glowing EF |
|
||
|
I hooked up a hks turbo timer i done exactly as insturcted but when i turn the car off with the key it kills the car but the timer counts down. I hooked it up in between the key barrel and the connector plug. I used the solid yellow wire, yellow with blue trace and yellow with red trace. Is their a problem in the installation or is the timer itself stuffed??
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
If turbo has water cooled CRA ???
You don't require a timer...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| shane falcon futura |
|
||
|
mate had the same prob with his el turbo he took it to a auto electrican i think u can by pass the smartlock for the ignition so when u turn it off it still runns and u can lock the doors and so on ,i think from memory his wasnt water cooled ba turbos and such dont use a timer as they are water cooled ,u only want it to idle it down, if u have been driving it hard any way check with your local auto elect to see if it worth getting it done properly...hope this info helps
_________________ BANNED |
||
| Top | |
||
| TROYMAN |
|
||
|
im running one on my ed, the timer works fine and the only effect smartlock has is i cannot lock the doors with the remote while the engine is running, but its not hard to lock it with the key as im standing at the door when i close it...lol
|
||
| Top | |
||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
You mustn't have it hooked up correctly. I has a HKS turbo timer on my ef. You only need to bypass smart lock if you want to use your remote to lock the car while it is running.
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
my smartlock is not bypassed and the timer works, its wired as per the timers diagram like i said above.. the only thing i cant do is lock it with the remote while the timer is running..
|
||
| Top | |
||
| Glowing EF |
|
||
|
I hooked it up as the diaghram and it doesnt work but im not sure if the timer is faulty. What colour wires did you guys use?
|
||
| Top | |
||
| TROYMAN |
|
||
|
mine a greddy timer..
but i have a red wire that goes to constant 12v a blue wire that goes to acc a green to ign on. a purple to speedo signal and black is earth.. does your timer have a swith on the rear to switch from ign to acc..?? |
||
| Top | |
||
| Glowing EF |
|
||
|
No it doesnt, what colours did u use off key barrel? Did u bypass smart lock?
|
||
| Top | |
||
| Glowing EF |
|
||
|
Ok cool thanks im not too worried about the remote as for some reason since ive put my microtech in i cant program the remote
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 4 guests |
