|
| Tech90 |
|
||
|
Just changed power steering racks for my EB. Feels and handles better, but it's got shudder now when I try to turn the wheel idling or when i'm taking off to turn a corner, getting out of parking, etc. Happens more to the left than the right but still shuttering. Didn't do this with the old rack.
It doesn't shutter when i'm driving and turning the wheel though, nor does it shudder when I brake. Old fluid was drained out, put new fluid in, turned the wheel left and right to get the air out... maybe there's still air trapped in it? Could it be the switch? Cheers. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
air in the system. is the level ok?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Tech90 |
|
||
|
Checked the fluid, it was almost full. Took the cap off, started the car, turned the wheel multiple times, didn't seem to shudder as much this time, although it was only on idle I didn't wanna drive it around again. Could be just air in the end but how long does it take to bleed it out properly or if I was driving around?
|
||
| Top | |
||
| phongus |
|
|||
|
Tech90 wrote: Checked the fluid, it was almost full. Took the cap off, started the car, turned the wheel multiple times, didn't seem to shudder as much this time, although it was only on idle I didn't wanna drive it around again. Could be just air in the end but how long does it take to bleed it out properly or if I was driving around? Mine took about a week. I think if you do circles lock-to-lock it might push the air out quicker. So find yourself a parking lot and do figure 8s.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| efxr6wagon |
|
||
|
I have heard it recommended to do half a dozen tight figure eights (not quite on the stops) to purge the air.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| Tech90 |
|
||
|
I haven't done any figure 8's yet but it's getting better now as I've barely had a problem with it this morning. I'll do some soon and then that should be it.
Cheers guys. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 85 guests |
