|
| ea_falcon |
|
||
|
hey gus what can this be the fuse for my brakes and cruise in my au2 fairlane v8 keep blowing, how can i fix this?
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Krytox |
|
|||
|
replace the globes and brake light switch, check the towbar wiring also.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ea_falcon |
|
||
|
ohh ok could a faulty globe cause this? were abouts is the brake light switch
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| kaino91 |
|
||
|
on top of the pedal to my knolage.. check the wires coming off the brake switch. they tend to get crushed
towbar wiring +1
_________________ BANNED. |
||
| Top | |
||
| ea_falcon |
|
||
|
i traced the rear break light wires and found that about 5 of them were crushed in the boot and touching each other so i taped them up but that still didnt fix the problem, so i then went to the shop changed the globes and the brake sensor and so far so good hasnt blown the fuse yet but ill take it for a test drive and see what happens after that
thanks guys for helpin me out fingers crossed
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| ea_falcon |
|
||
|
well after all that the fuse keeps blowing any other ideas or do i have to get the auto sparky to suss it out
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Benny D |
|
|||
|
keep looking for shorts.
or try putting a higher rating fuse see if it blows too.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Benny D wrote: keep looking for shorts. or try putting a higher rating fuse see if it blows too. Yeah put in a really big fuse in and when it catches fire you'll know what was the problem! 
_________________
|
|||
| Top | |
|||
| Benny D |
|
|||
|
fairlane6970 wrote: Benny D wrote: keep looking for shorts. or try putting a higher rating fuse see if it blows too. Yeah put in a really big fuse in and when it catches fire you'll know what was the problem! lol if that fails then roll up some ally foil and stick that in too 
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| ea_falcon |
|
||
|
what is the best way to check for shorts ??
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| lukey1990 |
|
||
|
ea_falcon wrote: what is the best way to check for shorts ?? Don't put a higher rated fuse in mate, if the recommended rating one keeps blowing there's problem that need to be addressed. You can use a multimeter to test for shorts, you can probably pick one up for about $10 (Bunnings maybe?) if you don't have one. The best way to test would be at the light fitting itself and test for continuity from each wire to the body. Ground one side of the multimeter to the body and use the other on the terminals in the plug. Obviously one should be ground and the other shouldn't. You should be able to narrow down the problem that way.
_________________
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 25 guests |
