|
| ray185 |
|
|||
|
Just wondering if anyone knows anything about DSM Turbos?
I'm considering this: http://www.ebay.com.au/itm/ford-turbo-k ... 4aab23d4ee as a cheap boost solution in my cruiser running EF I6. I did some googling but didn't turn up much (that made sense to me). Is it a chinese dud or what? In the pic it has A/R .70 M24 on the compressor housing. Aren't they Garrett numbers?? Manifold and the rest of the kit looks good to me. Has anyone used this kit before? Appreciate any help. Ray |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
good looking manifold actually, even if the turbo turns out to be rubbish. however it could all be made out of melted down teapots from vietnam...
_________________
|
|||
| Top | |
|||
| ray185 |
|
|||
|
Oh so you think it might be one of those ceramic turbos?
 I've sent the seller a question about it. Agree though, the manifold and the rest of the kit looks good. My only concern is the turbo. The price for the kit should answer my question - chinese turbo, but I'm hoping someone here tells me they are ok. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
for the price of the kit, the turbo would probably be an ultra cheapy.i.ive never heard of them,, as they say you get what you pay for..
considering a quallity garrett is around the $1300-$2000 mark depending on the type, i wouldnt expect great quality as in reliabillity or life span from a cheapy turbo, but it will still give the desired result if set up right.. |
||
| Top | |
||
| xcabbi |
|
||
|
Turbo is hit and miss but the manifold looks nice. Just buy it and swap the turbo over when it blows up. Could be weeks, could be years. I know of a monster performance ebay T04E that has been going strong now for about 3 years so they aren't exactly that bad.
|
||
| Top | |
||
| myquick6 |
|
||
|
Hi Ray,
I'm actually using his manifold now on my EF Fairmont with a cheap chinese T70 & 50mm wastegate, have had it on the car for nearly a year now & have never had an issue with it, manifold has a 12mm flange and all welded up nice & clean. For the money you spend it's good value, I only added a 12:1 FMU and retained my 2.5" Exhaust and couldn't be happier on 8psi I say go for it  Alex. |
||
| Top | |
||
| 4LEDboy |
|
|||
|
Alot of people are using his manifolds, from all reports they are a very good bit of gear.
Don't know about the turbo though.
_________________ {DESCRIPTION} < Click on it! You know you want too! Quote: Thats not the point *a**hole
|
|||
| Top | |
|||
| ray185 |
|
|||
|
Cheers for the advice. Depending on his reply I'll probably go ahead. Should get the old FJ40 moving a little more briskly.
|
|||
| Top | |
|||
| SWC |
|
||
|
For that price you get the Log Manifold, long runner manifold is an extra $300.00.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
