Fordmods Logo

how to identify standard injectors-bf typhoon 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: how to identify standard injectors-bf typhoon
Posted: Thu May 19, 2011 11:00 pm 
Oompa Loompa
Offline

Age: 37

Posts: 28

Joined: 25th Jul 2009

Ride: BF F6

Location: Port Hedland
WA, Australia

Hi guys

I just bought an 06 typhoon and wanna get a set of injectors and pump for it. im only asking because it has a flash tuner and 2x2.5" exhaust already and it is INSANLY quick. if it was me i wouldave got the injectors first thing. so i just wanna make sure they are still the standard ones first before purchasing them.

the ones fitted are a navy blue colour

also can i get away with just a flash tune after fitting a high flow cat and 4" dump pipe? (i live 1600kms away from the nearest tuner) and maybe an ebay or capa cooler? if so who is good to use?

Its done 100000kms but has had factory log book servicing and is in mint condition
Top
 Profile  
 
 
 Post subject: Re: how to identify standard injectors-bf typhoon
Posted: Fri May 20, 2011 1:54 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

Factory injectors are a navy blue...

But some tuners get them drilled, potentially with an output of upto 80lb I understand.

You'd really need to know what the previous owner did, and who worked on the car.

A retune isn't 100% necessary for just an exhaust. But it is when you replace the cat. So, has the cat been replaced too?

With the standard dump, injectors, cat you'd be looking near or just over 300rwkw. A higher flow exhaust will make a difference there.

But if it still has the stock cat, it would be doing a hard working 250/260 rwkw.
Top
 Profile  
 
 
 Post subject: Re: how to identify standard injectors-bf typhoon
Posted: Sun May 22, 2011 11:55 pm 
Oompa Loompa
Offline

Age: 37

Posts: 28

Joined: 25th Jul 2009

Ride: BF F6

Location: Port Hedland
WA, Australia

yes it still has the standard dump pipe and cat.

my intentions is to just do new injectors, cat & dump pipe and probably a direct swap intercooler. beyond that it gets to pricey, to hard and spirals into a bottomless money pit. for this would a flash tune be alright? it would only be till i get to perth. (next 3-12 months). it has a twin 2.5" exhaust fitted already.
what would be a realistic power figure?
also i can only purchase 95 ron fuel here if that makes a difference to anything?
Top
 Profile  
 
 
 Post subject: Re: how to identify standard injectors-bf typhoon
Posted: Tue May 24, 2011 10:59 pm 
Stock as a Rock
Offline
User avatar

Posts: 107

Joined: 12th Jun 2010

Ride: El falcon

Location: melbourne
VIC, Australia

You'd be better off buying everything you want to fit, take it with you to perth and then fit it to the car and get a tune straight up.
Changing the cat and exhaust many cause the engine to over boost. You many bend a rod.
You many also melt a piston from lean mixtures.

 

_________________

I enjoy the symphony of mechanical harmony, :lol:

EL build thread
Turbo DOHC - AU front suspension - AU IRS - T56 - xr kit
the-garage-f53/bbqburners-daily-turned-toy-d-t93182.html

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 5:27 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names