|
| EF Falcon_96 |
|
|||
|
Hello my falcon has got 235/35/19 on the front with superlows and rear has 245/35/19 ultralows they are not pre au but have spacers on front the guards are rolled and they dont rub on the guard they rub on the upper control arm is there anyway i get get out of this problem without just putting it on lows thanks
|
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Hmmm... it can be tricky I had 245's on 18's E-series offset and iI had ti take out the grease nipple so it wouldn't hit, maybe 225's might get you out of mischief?
_________________
|
|||
| Top | |
|||
| EF Falcon_96 |
|
|||
|
yer but i still have a bigger rolling Diameter of like 20mm do you think it will still work?
|
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
you'd really have to see where it's rubbing, Ive seen these with 20's so something should be able to be sorted out
_________________
|
|||
| Top | |
|||
| EF Falcon_96 |
|
|||
|
its rubbing on grease nipple far inner side on tyre
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
Most likely the spacers aren't thick enough. How thick are they? Should be 35-40mm thick. That's what I ran when I had Au rims. They were 17's but rolling dia would be similar
_________________ El XR6 Turbo |
|||
| Top | |
|||
| EF Falcon_96 |
|
|||
|
30-35mm spacers i think
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I've got same Tyres as u and mine don't scub. Plenty if guys gunning 20's with no issues . Would be the spacers I reckon not being thick enough.
Have a look and see how much it is rubbing by. Would an extra 10-15mm + thickness of spacers u have now. Be enough to bring it out and stop the rubbing .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| EF Falcon_96 |
|
|||
|
im uploading some pics i just took but tyre is turned so i could get my hand in there
|
|||
| Top | |
|||
| MAD |
|
|||
|
What width are the rims?
|
|||
| Top | |
|||
| GeZza200 |
|
||
|
Yep i have 235/35/19's and have no troubles at all, sounds like its just offset problem.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| EFFalcon |
|
|||
|
uniacidz wrote: I still dont know why people use spacers. Any sort of accident, and even if u have basic third party etc, they wont pay up, even the compulsary wont pay up. Mind you lot of people use em. Back on topic, Sounds like space depth is too small and 40mm is needed at least because thats a load of BS  Unless you've got specific cases to back your story up. But i do know of a few people who have stacked their cars and claimed insurance while running adapters. its no different to any other 'not quite RW' car out there. as for needing 40mm adapters... The required adapters depend on the offset and width of the wheel. A lot of upper ball joints don't have a grease nipple, so whilst some will have issues, other won't.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| EF Falcon_96 |
|
|||
|
hey guys my car has no grease nipples im thinking of bigger spacer because i need some for back or getting shock plate removed
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 58 guests |
