|
Nigel |
|
||
|
Hi all.
Have my EF XR8. The thermostat cover bypass outlet tube (goes from thermostat cover to water pump) has corroded - not much chance it will last too long. On the clevo's, these were replacable. It appears to be a pressed in item. Does anyone know what size they are, and where I can get them from? Alternatively, any ideas on alternatives? - The cover is in great nic. Nigel |
||
Top | |
Matt_jew |
|
||
|
On a clevo it was the hose barb that was pushed into the block that was replacable. Not the one in the thermostat housing.
Same as the wheezer , it is cast into the housing. New housing it is for you. They are not dear and you can get them at pretty much any parts joint.
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
Top | |
Sturmovik |
|
|||
|
Pretty sure its a screw in pipe? Or am I thinking of something else?
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
Top | |
Nigel |
|
||
|
Turns out its a 3/4in Press fit pipe. Im going to see if Ford do them - I removed mine and it has no damage. If it costs $20 that still saves me $80
|
||
Top | |
Nigel |
|
||
|
Score! (or is that win!!).
Nothing from Ford. Nothing in the KC Castings book, however a little research got us to KC125 - Gemini Bypass pipe. Its 3/4, and I'll press it in tonight with a little stag. $17 beats $99 The rest of the housing is good Thanks for the guidance guys Nigel |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 23 guests |