|
| creeture3 |
|
||
|
G'day thrillseekers, can somebody tell me if EA/B/D stub axles (steering knuckles if you wish) are the same as EF? Non ABS.
Cheers 
|
||
| Top | |
||
| 67RCE |
|
||
|
The uprights? No they are not.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| creeture3 |
|
||
|
that's a shame, as I had a pair of spare EL ones I was hoping to use to replace the ball joints w/out having the car off the road for a couple of days.
Ah well, such is life, as someone once said Thanks for that
|
||
| Top | |
||
| knowsfords |
|
||
|
I'm pretty sure that they are the same, its the upper/lower control arms that are different.
|
||
| Top | |
||
| 67RCE |
|
||
|
knowsfords wrote: I'm pretty sure that they are the same, its the upper/lower control arms that are different. pretty sure your wrong. They fit, but throw out geometry and chances of a good alignment.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| TROYMAN |
|
||
|
67RCE wrote: knowsfords wrote: I'm pretty sure that they are the same, its the upper/lower control arms that are different. pretty sure your wrong. They fit, but throw out geometry and chances of a good alignment. you will definatly need an alignment, from memory the tie rod hole is a few mm offset compared to ea-ed, so yes it will fit, but will need to be fitted as a pair.. |
||
| Top | |
||
| creeture3 |
|
||
|
I do know that some geometry changes were made between the models, and between EF and EL, but I am not exactly sure what.
Maybe I just do the EB ones 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |