|
japcrp |
|
||
|
hi guys
im really stuck and im not sure where to go next... i have replaced the 302 in my nf and i cant work out why the F#$K it wont start!!! it well doing my head in and im sure its just something stupid. to work out top dead center i got the no1 piston (closest to the alt) to the top ant moved the crank to the 0 marking in the middle of the scale etched in the harmonic balancer. pulled the dizzy out and set the rotor to the no1 lead closest to the front of the motor. when it cranks i can hear it back firen. moved the dizzy around a bit to see if that would help but no dice. there is fuel going through, i got spark, there is no leaks but im pulling my hair out trin to work out why. Can anyone see where i have gone wrong? if anyone knows a mechanic that come to your house please let me know cos i need to get this bucket going. im in brunswick and im happy to pay as im no mechanic. i just cant work out what the issue is thanks guys any help would be ausom |
||
Top | |
xafalcon |
|
||
|
You are probably 180 degrees out. Either swap the leads 1 & 6, 3 & 5, 7 & 4, 2 & 8. Or pull the dizzy and rotate the shaft by 1/2 a turn & reinstall (without swapping the leads)
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
Top | |
hans hartman |
|
||
|
firing is 30deg before top dead,#1 lead is at the back of the cap-its got a mark for it,the rotor turns antl clock wisefor leads.
_________________ R.I.P HANS HARTMAN |
||
Top | |
japcrp |
|
||
|
{USERNAME} wrote: firing is 30deg before top dead,#1 lead is at the back of the cap-its got a mark for it,the rotor turns antl clock wisefor leads. so if i set the no1 piston to the top and move the crank till the pointer is sitting on 30deg mark on the balancer thats correct? there is a line cut into the balancer whats the go with that? the rotor it sounds like is corect as i had it set to the no1 point at the back of the rotor cap. |
||
Top | |
japcrp |
|
||
|
we have a winner!!!!!!
set timin mark to 30 and she fired! not to bleed the brakes, fill the auto and get her tuned. thanks for the help guys. lets just say i was doin a happy dance.... |
||
Top | |
hans hartman |
|
||
|
1line on balancer is for timing chain,spockets,cam timing.30 is advance
_________________ R.I.P HANS HARTMAN |
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 36 guests |