|
| richie |
|
||
|
Still on the qn on MAFs.
Is there any difference in the pinouts on an ED (oval plug) MAF sensor and that of AU style (rectangular plug). Someone may have mentioned they are different and the wires should be connected in reverse order. Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| EDXR8 |
|
|||
|
They aren't really reversed, its just the AU plug is different and if you convert the wiring loom over you need to pay attention.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 55 guests |
