|
EA-SPAC-88 |
|
||
|
Hey all, I have a ea falcon and tonight whilst driving home I snapped my clutch pedal off the shaft and wondering what to do? Should I remove the pedal box and grind the rough bits back and weld it up. Again but this time reinforce it? I didn't have much time to look at it but its hanging loose, just my f**k Luck especially that I had planned to reinforce it this weekend.
Cheers, Brandon |
||
Top | |
hans hartman |
|
||
|
EA-SPAC-88 wrote: Hey all, I have a ea falcon and tonight whilst driving home I snapped my clutch pedal off the shaft and wondering what to do? Should I remove the pedal box and grind the rough bits back and weld it up. Again but this time reinforce it? I didn't have much time to look at it but its hanging loose, just my f**k Luck especially that I had planned to reinforce it this weekend. Cheers, Brandon fix it better-do search,i saw a few pics
_________________ R.I.P HANS HARTMAN |
||
Top | |
TROYMAN |
|
||
|
not much you can do except pull the dash and pedal box out and weld it up...
|
||
Top | |
EA-SPAC-88 |
|
||
|
TROYMAN wrote: not much you can do except pull the dash and pedal box out and weld it up... On the floor there is white plastic that's broken, it looks like a plastic washer, any ideas? Also should I replace anything else in my pedal box? |
||
Top | |
89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
the washer clips into the clutch cable at the pedal end. there are two halves. they are still available from Ford
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
Top | |
EA-SPAC-88 |
|
||
|
WILDEB wrote: the washer clips into the clutch cable at the pedal end. there are two halves. they are still available from Ford Thanks for that, anything I need to replace while its out? |
||
Top | |
89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
not that i can think of. maybe a few split pins that hold the clutch cable and brake piston to the pedal box
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
Top | |
EA-SPAC-88 |
|
||
|
WILDEB wrote: not that i can think of. maybe a few split pins that hold the clutch cable and brake piston to the pedal box Do those washers have a specific name? |
||
Top | |
89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
i went into Ford with the old ones and said that they go on the clutch pedal pin. they had them in stock. ask Papa Smurf on here
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
Top | |
EA-SPAC-88 |
|
||
|
Well I bought the clevis and its plastic bushes, and I've managed to get under the dash for look and turns out the clevis is fine, and the pin that the clutch pedal rotates on has slightly bent and put the strain on the plastic bush that's on the inner side of the split pin that holds the pedal on
|
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 73 guests |