|
| dunwood |
|
|||
|
Thanks mate, I'll check it out.
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| dunwood |
|
|||
|
A bit of a update
The gas tank is out, the gas wiring is 90% out, the interior is almost all out & the engine bay is 50% stripped. Just need to remove the wiring for the gas that goes to the boot for the gas gauge, the rest of the gas pipework, ditch the battery tray (kind of corroded), remove the fuel tank, remove the motor wiring in one piece (to be used in my mustang), & remove the motor & gearbox (also for the mustang). This leaves me with two questions. Where does the positive wire for the Idle Air Control go to? When the gas was in it, it was hooked to the main power wire for the EFI behind the intake manifold. Also, how do you remove the evaporator out of the car? I cannot see any bolts around the unit in the car at all.
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| dunwood |
|
|||
|
Had a busy weekend stripping out the LTD. still a bit to go before the motor comes out. Hopefully next weekend or so.
 the interior is all but nearly stripped out. also got the aircon unit out.  ohh yeah, i also got the sunroof out too  3mm plexiglass has been ordered for the hole in the roof. BTW, does anybody know where i can get a removeable rollbar/taxi bar? 26/2/2010 got some rocker covers for the motor today. won't need them until i get the pushrod lengths right 
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| dunwood |
|
|||
|
Well it seems that fotopic has been shut down so i lost all photo's of previous details on the LTD. any way, current progress.
Got the 302 & gearbox out of the LTD on the weekend.  Got a dash for the drag car for $50  Also started on the control panel for the drag car 
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Looks like good progress, I like the control panel in walnut!
_________________
|
|||
| Top | |
|||
| dunwood |
|
|||
|
It was dad's idea putting the start button into the cig lighter recess. Came up better than I thought
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| dunwood |
|
|||
|
Started to paint the motor this afternoon
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
{USERNAME} wrote: It was dad's idea putting the start button into the cig lighter recess. Came up better than I thought Yeah I've thought of that too but I need the outlet when we go on hols, Ipods, dvd players, phones etc, spose I could put one somewhere else!  Oooh that engine looks nice indeed! 
_________________
|
|||
| Top | |
|||
| huggiebear |
|
|||
|
i installed a key switch in one for a mate of mine. he had neons and wanted a quick way to turn them off so cops couldnt get him. turn the key - kills power - cops come up as to flick switches and nothing happens.
tho the starter looks good |
|||
| Top | |
|||
| dunwood |
|
|||
|
Pushed the car outside today to give the garage a clean out. Also gave the engine bay a degreese as well, removed the battery tray & painted the area where the tray was.
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| dunwood |
|
|||
|
Got my roll cage in the mail the other day. Got it from redline performance. Now just need some argon & some chromoly welding rods for my tig welder. Photos coming when it stops raining
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| Mar55s |
|
|||
|
just a s a matter of interest... are you keeping the grille?
|
|||
| Top | |
|||
| dunwood |
|
|||
|
Hmm, haven't decided yet. I've started to make my own alternator bracket by using a part of a 351c march performance bracket and making another part of it using aluminum. It's nearly finished so I"ll get a photo up when my camera gets charge. Btw, what is the size difference between the ford badge and the fpv badge?
_________________ 1968 Mustang Coupe (in progress) |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 84 guests |
