|
scottus |
|
||
|
hey mate you still got your old rims?
|
||
Top | |
scottus |
|
||
|
hey i have an ef falcon which i bought not long ago, theres a slight problem with it when im going really slow when the cars coming to a stop or taking of the whole car will viberate quite alot even when the car is stopped it will still do it, though when i put it in netural it doesnt do it. Though when i put it in netural theres slightly higher revs. my dad thinks it coz it revs to low while a mate things it due to the clutch. The car is 1995 and auto an ideas on what the problem could be? also the brake rotors need replacing if that helps
|
||
Top | |
ea street sleeper |
|
||
|
hey bud any pics of the actual suspension set up and the custom work that went into that im lookin at baggin the panda and wanna see what im getting into and so far dont know any1 but u that has bagged an e series lol
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
Top | |
EFFalcon |
|
|||
|
see here:
http://www.boostedfalcon.net/viewtopic. ... 19&t=19479
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
SWC |
|
||
|
scottus wrote: hey i have an ef falcon which i bought not long ago, theres a slight problem with it when im going really slow when the cars coming to a stop or taking of the whole car will viberate quite alot even when the car is stopped it will still do it, though when i put it in netural it doesnt do it. Though when i put it in netural theres slightly higher revs. my dad thinks it coz it revs to low while a mate things it due to the clutch. The car is 1995 and auto an ideas on what the problem could be? also the brake rotors need replacing if that helps Tell your mate that it's an auto and autos don't have a clutch or a 3rd peddle Check your engine mounts, EF's are fitted with an oil filled type mount and when they collapse they rest metal to metal and cause a vibration at idle, usually in gear. Usually it is the drivers side that fails due to heat from the exhaust, also it is the easiest to change. Undo mount, put a piece of timber acroos the sump and jack till you get enough clearance to change the mount, only need an inch or two and you are ok. |
||
Top | |
scottus |
|
||
|
SWC wrote: scottus wrote: hey i have an ef falcon which i bought not long ago, theres a slight problem with it when im going really slow when the cars coming to a stop or taking of the whole car will viberate quite alot even when the car is stopped it will still do it, though when i put it in netural it doesnt do it. Though when i put it in netural theres slightly higher revs. my dad thinks it coz it revs to low while a mate things it due to the clutch. The car is 1995 and auto an ideas on what the problem could be? also the brake rotors need replacing if that helps Tell your mate that it's an auto and autos don't have a clutch or a 3rd peddle Check your engine mounts, EF's are fitted with an oil filled type mount and when they collapse they rest metal to metal and cause a vibration at idle, usually in gear. Usually it is the drivers side that fails due to heat from the exhaust, also it is the easiest to change. Undo mount, put a piece of timber acroos the sump and jack till you get enough clearance to change the mount, only need an inch or two and you are ok. hey, i thought autos still had a clutch but not a peddle, becuase its auto but yeah ill see if that the problem |
||
Top | |
gusbus |
|
||
|
EFFalcon wrote: Front end changes that wagon/sedan wats with the back of it looks different.. added a wagon rear on top of a sedan?? both very good looking car =) |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 27 guests |