|
| scotty-williams |
|
||
|
picked up a full set of au seats to put into ed fairmont i have bolted the front in
im having trouble with the back one any one done this and how did they do it? |
||
| Top | |
||
| knowsfords |
|
||
|
They should still bolt in, the bolsters are different however as the latching mechanism changed.
Remove the latching posts, they just unscrew. Line up the AU striker plates, drill a couple of holes so they sit in like they would in an AU. If you're really careful you can remove the fabric off the AU bolsters and glue it straight over the EA-EL bolsters. Or you could see if an auto trimmer has any of your fabric in stock, should only take them a couple of minutes to skin your bolsters. |
||
| Top | |
||
| scotty-williams |
|
||
|
i have gotten the top half in but the bottom half is different can i drill holes in the floors sothey fit
|
||
| Top | |
||
| scotty-williams |
|
||
|
{USERNAME} wrote: i have gotten the top half in but the bottom half is different can i drill holes in the floors sothey fit its all good thanx for help i got them all fitted up they look good |
||
| Top | |
||
| knowsfords |
|
||
|
Ah yep, forgot to mention the wire frame from an E-series zip tied to the wire frame of the AU seat base will sort it out
|
||
| Top | |
||
| scotty-williams |
|
||
|
to my suprise my handbrake only bolted in the rear bolts in the front seats
has anyone done this conversion and if so how u over come the front bolt hole isusse |
||
| Top | |
||
| Ballast |
|
|||
|
{USERNAME} wrote: to my suprise my handbrake only bolted in the rear bolts in the front seats has anyone done this conversion and if so how u over come the front bolt hole isusse It would probably be easier to FIT EF/EL seat rails. Several people on here have done it. The AU front seats will bolt straight onto EF/EL rails.
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| scotty-williams |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: to my suprise my handbrake only bolted in the rear bolts in the front seats has anyone done this conversion and if so how u over come the front bolt hole isusse It would probably be easier to FIT EF/EL seat rails. Several people on here have done it. The AU front seats will bolt straight onto EF/EL rails. are they a stright bolt in or do u have to mod these |
||
| Top | |
||
| Ballast |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: to my suprise my handbrake only bolted in the rear bolts in the front seats has anyone done this conversion and if so how u over come the front bolt hole isusse It would probably be easier to FIT EF/EL seat rails. Several people on here have done it. The AU front seats will bolt straight onto EF/EL rails. are they a stright bolt in or do u have to mod these I havent done it. I have only fitted AU seats to my EL. I am still running EL rails. I believe that fitting the EF/EL rails to an EA-ED it is a matter of attaching a leg to the inside rail (only at the rear). There are several people that have fitted EF/EL seats to an EB/ED. They may be able to provide more info here.
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| knowsfords |
|
||
|
I have EF seats in my EB, you need a piece of thick walled tube (cant remember how long) and a long bolt or you can unpick the floorpan mount from an EF/EL and then weld it in.
|
||
| Top | |
||
| snelly91 |
|
||
|
i got givin a set of leather seats out of a el fairmont too put in my eb they would be the same as a ef hopefully all i have to do is unpick that step out of a ef/el, did u end up fitting the plastic covers back over the end of the rails or they didnt line up
|
||
| Top | |
||
| scotty-williams |
|
||
|
{USERNAME} wrote: i got givin a set of leather seats out of a el fairmont too put in my eb they would be the same as a ef hopefully all i have to do is unpick that step out of a ef/el, did u end up fitting the plastic covers back over the end of the rails or they didnt line up i put them back onbut i had to put a few new holes in the side so they clip in at the moment i just put a pice of tube in but i will be welding the section in for it my engineer said it will be safer |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 41 guests |
