Fordmods Logo

sisters eb - she wants s**t done - help 

 

Page 5 of 5 [ 66 posts ] Go to page Previous  1, 2, 3, 4, 5

 
 Post subject: Re: sisters eb wont start
Posted: Tue Feb 15, 2011 6:42 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

ToranaGuy wrote:
Jonathan Kakousidis wrote:
ok so i just went and double checked the one from th filter goes too the rail the one from the regulator goes to the tank

but when just took them off the confrime which line the fuel is coming from the tank to the rail
when i turned the key nothing no fuel so i cranked the motor over a few times and no fuel is coming outof either lines so now im leaning towards fuked fuel pump :(


Get a test light or multi meter & test at the pump end if you have any power. Check the earth in the boot near the tail light, it needs to be really clean. If you have power there & a good earth, get another fuel pump.

I like to use a coke bottle when testing if the pump is priming, obviously you drink the coke first, then use the empty bottle. Some fuel should end up in it when the pump is priming.

Cheers

ToranaGuy


what sort of volts should i be getting at the pump????
Top
 Profile  
 
 
 Post subject: Re: sisters eb wont start
Posted: Sun Feb 20, 2011 4:24 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

hazzar the car is fixed :D

so after chaging the fuel pump and the ecu/fuel pump relays agian and the fuseable links that connect to the + side of the battery the car fired straight up
just had to adjust the timming a little but all good now



i would like to thank everyone who helped out
Toronaguy
Phongus
mreb
AU99
EL_Fairmont
any any one who i may have forgot thanks guys.
Top
 Profile  
 
 
 Post subject: Re: sisters eb wont start
Posted: Sun Feb 20, 2011 5:05 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

Good to hear you got it sorted. So what was the culprit? the pump, relays or fuseable links?

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: sisters eb wont start
Posted: Sun Feb 20, 2011 5:49 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

not a 100% sure i replaced all at the same time
but im leaning towards the fuel pump it was making some weird nosie before i replaced it like staying on when i turned th key off.
Top
 Profile  
 
 
 Post subject: Re: sisters eb wont start
Posted: Mon Feb 21, 2011 10:39 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

Jonathan Kakousidis wrote:
not a 100% sure i replaced all at the same time
but im leaning towards the fuel pump it was making some weird nosie before i replaced it like staying on when i turned th key off.


That could have been the pump or the relay for it. Your welcome for the help.

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|

Top
 Profile  
 
 
 Post subject: Re: sisters eb wants s**t done to it need help
Posted: Sun Jul 31, 2011 2:55 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

ok my sister would like me to install some lighting in the foot wells
but being a gli it dosent have any wiring there
my question is which wires do i need to splice to get them to work?

she would also like me to install a trip computer
my question to that one is can i just run all the wiring straight to the ecu or bcm (which ever one is required) as i have readed the techo about it
instead of running them to every sensor in the car?

just trying to make my job easier

cheers jfk
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 5 of 5  [ 66 posts ]  Go to page Previous  1, 2, 3, 4, 5

Who is online

Users browsing this forum: No registered users and 77 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Nov 25, 2024 8:22 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names