|
| EBSKIDPIG |
|
||
|
Was wondering if there is a way to embose them on the car a bit more. Nothing bolt on I was wondering if you could stretch them out a little or roll them or something. I'm pretty novice when it comes to panel work and car in general its just me pasion!
 So any advice would be awesome!Cheers Smitty |
||
| Top | |
||
| EF_96_XR |
|
|||
|
What are you wanting to do it for?? tires scrubing??
cheers
_________________ 96 EF XR6 Factory 5 sp, currently in the middle of building a new motor |
|||
| Top | |
|||
| EBSKIDPIG |
|
||
|
Nahh, I want to tuck stretched sidewalls under em.
 no scrubbing
|
||
| Top | |
||
| OZBMX |
|
|||
|
can always build it out with fibreglass then blend it in with bog.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| 67RCE |
|
||
|
{USERNAME} wrote: Nahh, I want to tuck stretched sidewalls under em. no scrubbingYou going for 10" wide fronts? There is no need to pump guards on an e series with 8" wheels. Just roll the inner lip up.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| EFFalcon |
|
|||
|
can even get 9" wide under there.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| 67RCE |
|
||
|
{USERNAME} wrote: can even get 9" wide under there. 9.5's fit on UPC brakes. Malakai did it on his AIT EA.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| EFFalcon |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: can even get 9" wide under there. 9.5's fit on UPC brakes. Malakai did it on his AIT EA. they stuck outside the guards... if it was lower... nup.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| EBSKIDPIG |
|
||
|
15 x 10's on the back much guard work to be done there? I'm going to have fairly crisp suspension set up...
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 46 guests |
