|
| Pane |
|
||
|
G'day
I want to change the oil in my t5 xr6 box. I know which is the drain plug but which is the filler hole? Do you need to put teflon tape around the thread of the drain and filler plug? Cheers
_________________ If its too loud your too old!!!!!!!!!!!! |
||
| Top | |
||
| voids |
|
|||
|
the filler is about 3inches directly above your drain plug, the drain and filler plugs are identical. good idea to clean the threads with a wire brush or something and re-apply teflon tape or some kind of thread sealer. o just make sure u put the right fluid in it too.
_________________ '96 DF II LTD 6cy |
|||
| Top | |
|||
| FTR-XR6 |
|
|||
|
I'd use the tape just in case you get a bit of loctite in the 'box when putting it on the thread heh. Where do you get the tape from voids? My box is about due for some new oil.
_________________
|
|||
| Top | |
|||
| voids |
|
|||
|
you can get thread tape /teflon tape from the plumbing section of your local hardware shop.
Ford recomends (out of the workshop manual) -Dexron II -ATF (motorcraft R1-36) - 1.9L Oil aditive lubrizol 7906 - 150ml
_________________ '96 DF II LTD 6cy |
|||
| Top | |
|||
| Interceptor |
|
||
|
as for thread tape...... get either the thick pink plumbers tape, or the thread string that loctite makes
_________________ Banned |
||
| Top | |
||
| Punnisher_42 |
|
|||
|
i suppose the other very important part is suggestions on how best to get the oil in the box. I did it with an old dishwashin container - filled it up with oil and squeezed it in the hole.. lost a bucketload of it on the floor though...
_________________ Regards, |
|||
| Top | |
|||
| voids |
|
|||
|
i just got a plastic pump from super cheap auto fits onto oil containers ant comes with a short hose. cost under $10
_________________ '96 DF II LTD 6cy |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 42 guests |
