Fordmods Logo

Home » Forums » Fordmods Tech » Interior Modifications

heater core. 

 

Page 2 of 2 [ 24 posts ] Go to page Previous  1, 2

Post New Topic Post Reply  Previous topic Next topic
 
TROYMAN
 Post subject: Re: heater core.
Posted: Sun Aug 07, 2011 8:22 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
yeah, sometimes if you get rough the pipe join can crack inside the heater box..
thats how i stuffed the first one in my ea, so now if the heater hose has to come off i just cut it off and replace it..better to be safe then sorry... :)
Top
 Profile  
 
 
wild-el
 Post subject: Re: heater core.
Posted: Sun Aug 07, 2011 8:48 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia
my tight a** mechanic must of pulled them because it wasnt leaking before i went to the mechanic

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html
Top
 Profile  
 
 
ef_falcon_95
 Post subject: Re: heater core.
Posted: Sun Aug 07, 2011 10:24 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia
i dont think u have to remove them from the heater box when doing a engine swap???

troyman- when u cut them do u leave the off cut bit on the pipe or cut it off completely. if u left it on i think it would hit on the firewall when your taking the heater box out??

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
TROYMAN
 Post subject: Re: heater core.
Posted: Sun Aug 07, 2011 10:34 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
when i cut the hoses off i cut a slit with a stanley knife length ways and kind of peel the hose open like a bananna..
Top
 Profile  
 
 
ef_falcon_95
 Post subject: Re: heater core.
Posted: Sun Aug 07, 2011 11:03 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia
ahk thought so .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
Sefton
 Post subject: Re: heater core.
Posted: Sat Aug 13, 2011 1:05 am 
Stock as a Rock
Offline
User avatar

Age: 31

Posts: 189

Joined: 14th Oct 2010

Gallery: 11 images

Ride: 1991 Ford Fairmont Ghia

Location: Palmerston North
New Zealand
geees wish i had read what troyman said, this morning. Replaced the thermostat on the ea today couldn't believe how hard it was to get that heater hose off under the inlet manifold!

 

_________________

Build Thread - More of a mismatch of parts :P the-garage-f53/seftons-ea-t106586.html
Top
 Profile  
 
 
wild-el
 Post subject: Re: heater core.
Posted: Thu Aug 25, 2011 2:45 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia
fkn hell man i put it all back together and start the car and now theres a hissing sound coming from the top right hand corner of the heater box.any ideas?

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html
Top
 Profile  
 
 
ef_falcon_95
 Post subject: Re: heater core.
Posted: Thu Aug 25, 2011 3:14 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia
Check your build thread . I posted in it .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
wild-el
 Post subject: Re: heater core.
Posted: Thu Aug 25, 2011 10:34 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia
hahahaha did cheers will check it tomorrow had to work today

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 2 of 2  [ 24 posts ]  Go to page Previous  1, 2
Jump to:  

Home » Forums » Fordmods Tech » Interior Modifications

Who is online

Users browsing this forum: Majestic-12 [Bot] and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 25, 2024 4:16 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names