|
| DOHCED |
|
|||
|
hi all got myself a ef fairmont auto here, been great driving it however the gearbox has been kinda slipping lately, like when I reverse brake and the put in d real quick the car revs and then chucks itself into gear roughly, and also the gear lever wobbles from left to right and isn't a smooth process moving gears,
car has done just under 290,000kms etc thanks
_________________ XG Ute - 3 Seater - Auto - Dual Fuel |
|||
| Top | |
|||
| bry40l |
|
|||
|
get the transmission serviced if you havent done it in a long time, they hate old transmission fluid that causes sliping and harsh changes to a certain point
_________________ BF XR6 |
|||
| Top | |
|||
| DOHCED |
|
|||
|
yeah dont think it has, only does it from time to time, might take it to midas soon
_________________ XG Ute - 3 Seater - Auto - Dual Fuel |
|||
| Top | |
|||
| TROYMAN |
|
||
|
your shift moving side to side is just stuffed bushes in the shift, cheap to replace at around $8 for the 2 bushes.
the gearbox not going straight into gear could be its just low on fluid? |
||
| Top | |
||
| efxr6wagon |
|
||
|
The BTR autos are very sensitive to low fluid level, and will slip just like you describe if it's the slightest bit low. Throw 500mls of fluid down the transmission dipstick tube and see if that fixes it - it did with my EF.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 50 guests |
