|
| ef-40-rd |
|
||
|
Hey all, needing some advice, I got pulled over today for a rbt.. Anyway the cop looked over the car and told me that the 18s i have on my car are illegal as the tire placard is 15inch and im only allowed to upgrade to 17s no bigger. but he said i can get an engineers certificate. so im wondering if anyone knows how much they are? where to get it and does anyone on here can get them cheap in the riverina area like wagga wagga or canberra or even albury?. thanks guys
_________________ 95 ef futura |
||
| Top | |
||
| Johnson stroker |
|
|||
|
did you advise that 16's were the option and unless optioned did not appear on the tyre placard?
Otherwise, put your stockies back on until you can get it looked at by an engineer, any engineer worth a grain of salt will be aware of this, alternately find an EF xr placard that lists the 16" option.
_________________
|
|||
| Top | |
|||
| bry40l |
|
|||
|
dc_todd wrote: did you advise that 16's were the option and unless optioned did not appear on the tyre placard? Otherwise, put your stockies back on until you can get it looked at by an engineer, any engineer worth a grain of salt will be aware of this, alternately find an EF xr placard that lists the 16" option. if you want the ef xr placard theres an el xr6 being parted out on ebay at the moment, its not like anyone else is going to want it lol
_________________ BF XR6 |
|||
| Top | |
|||
| ef-40-rd |
|
||
|
thanks guys. i did tell him that i think bieng an ex police car it did have 16s standard coz my stocks are 16s. anyway i think changing the placard plate/sticker is a tops idea. thanks heaps guys..
_________________ 95 ef futura |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
instead of taking it up the a*** like he wants you to, how about you research your NSW regulations about this imaginary rule
here in QLD according to the QT website you can have any diameter wheel as long as you fit the correct size tyres to keep the outer rolling diameter the same as stock |
||
| Top | |
||
| ef-40-rd |
|
||
|
only allowed 2 inch difference here
_________________ 95 ef futura |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
ef-40-rd wrote: only allowed 2 inch difference here well ive tried to help you, but you know better so i will leave it at that btw, it took me 2 mins to find the regulations in NSW regarding wheels and tyres....... |
||
| Top | |
||
| efxr6wagon |
|
||
|
"The outside diameter of the wheel and tyre combination must be no more than 15mm over the largest diameter
wheel and tyre combination specified for the vehicle and not more than 15mm below the smallest diameter wheel and tyre combination specified for the vehicle." It's all about the outside diameter of the tyre. You could probably run 20's if you had a low enough profile tyre. You can read the detail here: http://www.rta.nsw.gov.au/registration/ ... 9_rev4.pdf
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 140 guests |
