|
turbofairmont |
|
||
|
Hi all,
Need some help, my car decided not to give any spark anymore, checked the leads and coil pack and they are fine. My bro who is helping to fix the car decided to do a diagnostics test and it cam up with 5 codes. they are: --511 Internal eec v fault --786 PIL output check --214 CMP sensor input failed --578 Battery volt too low --636 trans oil temp fault we have never seen these codes before so don't really don't know what to do next. We now that code 578 is probably caused by the car sitting around for the last 3 days and the stereo has probabkly drained the battery. Code 786 could be cause by the econ button being in performance mode. But codes 511, we don't have a clue wat to do about, the 214 code, we might have to change the camshaft sensor, and 636 well dont know why its throwing that code. Please help me what should we do, where do we start. thanks all TURBOFAIRMONT
_________________ FORD 1996 EF FAIRMONT ARGON SILVER |
||
Top | |
hans hartman |
|
||
|
re charge the battery-under 12v nothing happens,sart from there.
_________________ R.I.P HANS HARTMAN |
||
Top | |
tyler06 |
|
||
|
Mate check you crt lamp fuse because if its blown the car will crank but not start.
|
||
Top | |
turbofairmont |
|
||
|
hey all,
found out the problem, ecu failure. Its being fixed tomorrow.
_________________ FORD 1996 EF FAIRMONT ARGON SILVER |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 111 guests |