|
| Jeco6910 |
|
||
|
I put a 5 speed in my xh ute with a new clutch and pressure plate ect but I can't seem to get enough adjustment with the cable.. So the clutch keeps slipping.. Any ideas??
|
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: I put a 5 speed in my xh ute with a new clutch and pressure plate ect but I can't seem to get enough adjustment with the cable.. So the clutch keeps slipping.. Any ideas?? Did you use a BRAND new cable? did you replace the clutch cable clevis and bushes? is the bush in the end of the clutch lever ok? Look at all of that first. |
||
| Top | |
||
| Jeco6910 |
|
||
|
Ok I put new bushes on the clutch pedal shaft because they were worn nd a new cable and it's working beautiful thanks for your help.. Cheers
|
||
| Top | |
||
| Feral |
|
||
|
I put a new cable on a few months ago and I have been adjusting it every few weeks. It drives me crazy. When I push the clutch pedal in, the entire firewall moves!! Don't know what to do about that!!
No help but I hear ya. 
_________________ A dog, a bike, a Ute |
||
| Top | |
||
| bry40l |
|
|||
|
falcons are notorious for cracking the firewall mate, probably needs to be welded up and while your there make sure to fit a fire wall strenthener plate to make sure it doesnt happen again
_________________ BF XR6 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
