|
| daniel000 |
|
||
|
Hi guys
Had a look through google and search function on fordmods but couldnt really find anything. Im just after some sort of an idea of, 1. if it is possible to adjust my camber kit on my EF Fairmont and if so is it a hard thing to do ? I seem to always wear more of my tyre out from the inside and I have a camber kit put on to rectify this problem thanks daniel |
||
| Top | |
||
| EFFUTURA4.05SP |
|
|||
|
Do a search on shim type camber kits (fixed and cheap) or nolothane do a thread adjustable kit.
It just moves the upper control arm out change the angle of the steering knuckle
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| EFFUTURA4.05SP |
|
|||
|
Check the ball joints, tie rods and ends for play too. made a massive difference to my car
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| daboss |
|
||
|
no 1 check your wheel alignment at a competent aligner and get them to check your front end,if your tyres are wearing the insides it is either to much camber,toe out or worn parts or tyre pressures are too low,I put in a pedders camber kit in my car eb xr8 cheap but the reason I did that was the bushes in my top control arm to chassis were dust then I found my lower ball joints loose as,I ended up rebuilding my entire front end and suspension front to rear lucky I am a wheel aligner
|
||
| Top | |
||
| Fairghia95 |
|
|||
|
Hey, da boss what would it cost to do a front end like you did,for a nf fairlane if i took it to a workshop,.if you have any idea thanks mate, or if someone else would know, i would apreciate that.thank you.
_________________ *NF FAIRLANE RIDING ON KING SPRING ULTRAS AND 20 INCH BSA CUSTOMS* |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
