ok, so ill be changing my head gasket in the next week or 2, just wondering while ive got the head out, what else should i check or change? oil/water pumps? i'll be changing plugs and leads, would like suggestions as i plan on keeping the car for a while and id rather change it all now than bit by bit, its a 95 ef gli with 187km on it.

thanks in advance

head gasket
head bolts ( but that is a given)
exhaust gasket
intake gasket
rocker cover gasket ( only if required)
spark plugs
spark plug leads
oil and oil filter
thermastat (recommend a 82 degree to stop the car from over heating, if this was the promblem in the first place )
radiator fluid
fuel filter
timming chain (again only if required)

i only change the water pump and its gasket if its leaking or has failed.

these are the major ones i replace when doing a head at a minimum

then you could think of doing some head work and/or cam while your at it saves you doing this twice.

im putting an ef xr6 head on with a wade 1632 cam , wats the timing chain worth any idea's? i also intend to do all the gasket and head bolt as its standard for the job

if i remeber correctly i think i paid about 100-120 bucks for a timing chain kit.
that gave me the chain, tensioner, gears and gasket.