|
| eattsie9 |
|
|||
|
so im getting a bit of a burnt rubber smell first picked up on it one night when i got home and dad asked me if i had been out cuttin up
as far as i can gather its not the tyres im not losing traction or anything. so i think it may be my brakes? its usually after a bit of hard braking any other ideas ?? thanks
_________________ Ba Xr6 Boat |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Have you checked the inside of your tyres to see if something is rubbing?
|
||
| Top | |
||
| efxr6wagon |
|
||
|
If it's just a "hot" smell, it could be a seized brake caliper. In that case, you should hear a tick, tick, tick sound from one caliper as it cools. Spraying it with water will tell you quickly too
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| eattsie9 |
|
|||
|
thanks guys will check both of those out
_________________ Ba Xr6 Boat |
|||
| Top | |
|||
| Benny D |
|
|||
|
yea i useually have this burt rubber smell comming from the back of my car.
useually coupled with smoke signals and some more rubber in the guards   .but i just cant figure it out...   .
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| eattsie9 |
|
|||
|
lol i have a feeling yours is driver inflicted
_________________ Ba Xr6 Boat |
|||
| Top | |
|||
| Mr220kw |
|
|||
|
Broken exhaust hanger???
Mr220kw |
|||
| Top | |
|||
| au055 |
|
||
Age: 69 Posts: 167 Joined: 3rd Jul 2009 Ride: 2002 AU Fairlane Sportsman Location: Narellan |
Mate, check your belts and pulleys. I had the same thing and could not work it out until one afternoon travelling down the highway I looked into the rear mirror and saw smoke. Pulled over and found that the idler tensioner pulley had seized and screwed the belt. With the crappy standard cluster that was in the car, did not see any alternator light come on. Spoke to a few guys who have since had the same problem. You don't know it is getting worn until it seizes. Loosen the belt and turn the pulleys by hand and see if they are free running. Good luck.
|
||
| Top | |
||
| eattsie9 |
|
|||
|
thanks heaps guys
_________________ Ba Xr6 Boat |
|||
| Top | |
|||
| ba_xr6bw |
|
|||
|
So I'm quessing that the idler pulley was the problem??
There's 2 idler pulleys. Which one was it? The top 1 or tensioner 1?
_________________ BANNED USER |
|||
| Top | |
|||
| ba_xr6bw |
|
|||
|
It gets replaced with the underdrive kit anyway if it's the one next to the tensioner!!
_________________ BANNED USER |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
