Some d1ckhead put glue in the door locks. I was able to get the passenger side one going again, but not the driver's side. Can anyone tell me how are the locks accessed?

You will need to remove the door trim then remove the door handle (The door handle is held on by two 10mm nuts). Once the door handle is removed you will have to remove the slide in clip that holds the lock in place inside the door. Then pull the lock out from outside the door and slide it off the rod.

Thankyou for the reply. That's the route I took, but i got stumped at the spot where the door trim attaches at the top, where the window disappears down inside. Couldn't work out how to detach at that point without breaking something.