Fordmods Logo

Need some advice on how much some paint work will cost 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: Need some advice on how much some paint work will cost
Posted: Wed Nov 02, 2011 5:52 pm 
Fordmods Newbie
Offline

Age: 30

Posts: 16

Joined: 3rd Oct 2011

Ride: Ford EF Falcon XR6

Location: Port Macquarie
NSW, Australia

Hi guys,

I was wondering if any spraypainters or people with experience could have a guesstimate on how much the following paint work would cost.

I need the following stuff resprayed: *Factory Ford Gunmetal Grey

--

Both XR hood vents (the clear on both of them is flaking)

The underside of front bumper (everythings scratched up from gutters from previous owner)

The topside of the rear spoiler

The Top half of the rear drivers side quarterpanel (from the body strip upwards towards the boot. Various imperfections / clear coat flaking)

A small paint imperfection near the numberplate lamp on the rear bumper

A heap of stone chips near the Ford Logo on the front bumper

One brand new passenger side mirror

--

It seems like alot, but it really isnt too much surface area of metal to be resprayed, but I dont know how it all works so im in need of some experienced opinions.

Thanks,

Ben
Top
 Profile  
 
 
 Post subject: Re: Need some advice on how much some paint work will cost
Posted: Wed Nov 02, 2011 6:16 pm 
Getting Side Ways
Offline

Age: 32

Posts: 510

Joined: 8th Aug 2010

Gallery: 9 images

Ride: NF Fairlane Ghia

it will depend greatly on who you go to because some people will do a good job and others wont

got a hyundia bonnet painted for $250 and it wasnt done very well at all within a few months it was getting orange peel and dark spots etc
but my old man got his XC paint patched up by a true old school pro $1k just to fix some small area's and its bloody great work you cant even tell

so you get what you pay for mate

 

_________________

NF Fairlane Ghia, Brand New Leather Interior, Wallnut All Through, 800W RMS JL Audio Sound System, Lowered King Springs And Monroe GT Shocks, Custom BA/GT Air Intake, Holley Highflow, Simmons B45's, Going To Be Supercharged At 9-12psi With Stage 4 Head And Cam With Pacemakers And 3" Exhaust

Top
 Profile  
 
 
 Post subject: Re: Need some advice on how much some paint work will cost
Posted: Thu Nov 03, 2011 12:23 am 
Fordmods Newbie
Offline

Age: 30

Posts: 16

Joined: 3rd Oct 2011

Ride: Ford EF Falcon XR6

Location: Port Macquarie
NSW, Australia

Ok heres some pics that I was able to get with spare point and shoot, sorry bout bad quality, dslr batterys dead.

Underside of the front bar
Image

vent (both are pretty much the same, so this x2)
Image

topside of the spoiler thats pretty bad
Image

imperfections on the rear bar
Image

the worst bit of the quarterpanel
Image

scratch on the same quarterpanel just below the above photo
Image

some sort of cracked paint on the same quarterpanel above the wheelarch
Image

----


And ontop of that, as mentioned.

One new passenger mirror & a row of bad stonechips near the ford logo on front bar. Pretty much just near the the bit where the bonnet meets the front bar (where you put ur hand under to undo the latch.

Thanks guys
Top
 Profile  
 
 
 Post subject: Re: Need some advice on how much some paint work will cost
Posted: Thu Nov 03, 2011 9:20 am 
Getting Side Ways
Offline

Age: 32

Posts: 510

Joined: 8th Aug 2010

Gallery: 9 images

Ride: NF Fairlane Ghia

if this much of the car is having the clear peal off the rest of the car wont be to far off

what you can do with this is(if you can do it your self) is just hand sand the clear away using 600 wet and dry then clean the car with wax and grease remover and paint it with a aryclic clear lacquer this is only a quick fix

but to me looks like the actual colour on the rear wing is gone id suggest removing it before paint and painting it again with colour then clear

to fix it properly you would have to take the entire car back to metal and start again with undercoats and primers etc

 

_________________

NF Fairlane Ghia, Brand New Leather Interior, Wallnut All Through, 800W RMS JL Audio Sound System, Lowered King Springs And Monroe GT Shocks, Custom BA/GT Air Intake, Holley Highflow, Simmons B45's, Going To Be Supercharged At 9-12psi With Stage 4 Head And Cam With Pacemakers And 3" Exhaust

Top
 Profile  
 
 
 Post subject: Re: Need some advice on how much some paint work will cost
Posted: Thu Nov 03, 2011 9:56 am 
Fordmods Newbie
Offline

Age: 30

Posts: 16

Joined: 3rd Oct 2011

Ride: Ford EF Falcon XR6

Location: Port Macquarie
NSW, Australia

Fordsrule174 wrote:
if this much of the car is having the clear peal off the rest of the car wont be to far off

what you can do with this is(if you can do it your self) is just hand sand the clear away using 600 wet and dry then clean the car with wax and grease remover and paint it with a aryclic clear lacquer this is only a quick fix

but to me looks like the actual colour on the rear wing is gone id suggest removing it before paint and painting it again with colour then clear

to fix it properly you would have to take the entire car back to metal and start again with undercoats and primers etc


The entire car???

(Excluding the few stonechips on the front, and the little knock on the rear bar)
The rest of the car is pefectly fine besides the few stonechips here and there, in really good condition actually. Its just those two vents, the spoiler, and the top half of a quarter panel lol.
Top
 Profile  
 
 
 Post subject: Re: Need some advice on how much some paint work will cost
Posted: Thu Nov 03, 2011 4:21 pm 
Getting Side Ways
Offline

Age: 32

Posts: 510

Joined: 8th Aug 2010

Gallery: 9 images

Ride: NF Fairlane Ghia

Ben_EF_XR6 wrote:
Fordsrule174 wrote:
if this much of the car is having the clear peal off the rest of the car wont be to far off

what you can do with this is(if you can do it your self) is just hand sand the clear away using 600 wet and dry then clean the car with wax and grease remover and paint it with a aryclic clear lacquer this is only a quick fix

but to me looks like the actual colour on the rear wing is gone id suggest removing it before paint and painting it again with colour then clear

to fix it properly you would have to take the entire car back to metal and start again with undercoats and primers etc


The entire car???

(Excluding the few stonechips on the front, and the little knock on the rear bar)
The rest of the car is pefectly fine besides the few stonechips here and there, in really good condition actually. Its just those two vents, the spoiler, and the top half of a quarter panel lol.



if your going to do the dodge sand and clear dont have to do the whole car but id expect others bits to start to follow suit shortly after

just sand a nice area around the peeling clear then paint with clear (even just clear lacquer acrylic in a can will do)

 

_________________

NF Fairlane Ghia, Brand New Leather Interior, Wallnut All Through, 800W RMS JL Audio Sound System, Lowered King Springs And Monroe GT Shocks, Custom BA/GT Air Intake, Holley Highflow, Simmons B45's, Going To Be Supercharged At 9-12psi With Stage 4 Head And Cam With Pacemakers And 3" Exhaust

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 17, 2024 3:45 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names