Ok so i had to pull out transmission after tailshaft snapped at 80km/h at rear uni. Had to replace tailshaft and rear extencion housing and the front seal i removed transmission replaced extension housing front and rear sealand pulled tranny apart to inspect and clean everything and a service. all good fixed and fit everything back together and stuck it back in car. i had a eb tail and was couple of mm off. when to wreakers and watched him pull anothere off same car as mine ef fairmont. went home to fit it on and slides in all way but is like 2 mm off wtf. everything looks and is as was it was. now the funny bit wont come back out plying kicking swearing tap with hammer and even option c tryed pulling with ute pulld car and snapped rope wtf there nothing that should stop ityoke strait rear shaft strait park nutral ect work. same tailshaft help my car dont like me

epic fail.

what's actually stuck ? the shaft yolk in the extension housing of the box ? never heard of that happening before unless the splines are bound up.

Umm turns fine like new doesnt feel like it loose and ant rubbing the spine are strait on both thats the thing and i wd40 both before i did it nothing benta ute couldnt pull it just pulled car with.it left me clueless new rear seal the speedo gear slid on fone and hasnt moved and it second tailshaft identical to first