|
| c james |
|
|||
|
Hi. recently did the head gasket on my ed fairmont and now every time i start it up when its cold, or been sitting around for a few hours it tapps like a lifter is dry or stuck, then goes away, never lasts more than 9 seconds.
just wondering if this will ever go away? maybe i should a different grade oil? seeing if anyone has ever had this problem? cheers
_________________ ED Fairmont Ghia. t5 conversion w h/d exedy, 3:45:1 lsd, pacemaker extractors, 2.5" custom exhaust, waggott cam,K&N high flow panel filter, TI performance chip w/ 4 tune switch(2 ED, 2 EL tunes) king 18's, el thermo fan w/ Davis Craig switch. 5000K hids,led lighting, doof box in boot. |
|||
| Top | |
|||
| low_ryda |
|
|||
|
thicker oil actually takes longer to warm up/thin down which creates more noise on startup. Usually only a fix for full time noisy lifters. My advice is get used to it.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| c james |
|
|||
|
yeh, its nothing major, just sounds a bit dodgy when u start it and its ticking away for a bit. people give u some weird looks. cheers for you input.
_________________ ED Fairmont Ghia. t5 conversion w h/d exedy, 3:45:1 lsd, pacemaker extractors, 2.5" custom exhaust, waggott cam,K&N high flow panel filter, TI performance chip w/ 4 tune switch(2 ED, 2 EL tunes) king 18's, el thermo fan w/ Davis Craig switch. 5000K hids,led lighting, doof box in boot. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I use 5w 40 oil in my EB and it always runs and starts quiet. When i used 50w it was noisy on cold starts for a few secs. Try a thinner oil and see how it goes providing your lifters arnt stuffed.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| c james |
|
|||
|
93EB wrote: I use 5w 40 oil in my EB and it always runs and starts quiet. When i used 50w it was noisy on cold starts for a few secs. Try a thinner oil and see how it goes providing your lifters arnt stuffed. Cheers for that, yeah well it wasnt noisy before i did the gasket so i guess the lifters are fine. i will try a thinner grade oil and see how i go. thanks mate
_________________ ED Fairmont Ghia. t5 conversion w h/d exedy, 3:45:1 lsd, pacemaker extractors, 2.5" custom exhaust, waggott cam,K&N high flow panel filter, TI performance chip w/ 4 tune switch(2 ED, 2 EL tunes) king 18's, el thermo fan w/ Davis Craig switch. 5000K hids,led lighting, doof box in boot. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Im using Penrite HPR 5.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
93EB wrote: Im using Penrite HPR 5. I would suggest this is too light for a coon, something a bit heavier if you get oil pressure issues would be suitable as well.
_________________
|
|||
| Top | |
|||
| c james |
|
|||
|
would penrites sin10 oil 10w70 do the trick? its ment to be good stuf
_________________ ED Fairmont Ghia. t5 conversion w h/d exedy, 3:45:1 lsd, pacemaker extractors, 2.5" custom exhaust, waggott cam,K&N high flow panel filter, TI performance chip w/ 4 tune switch(2 ED, 2 EL tunes) king 18's, el thermo fan w/ Davis Craig switch. 5000K hids,led lighting, doof box in boot. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Thats a very heavy oil. might make the lifters worse.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| low_ryda |
|
|||
|
sure would be quiet though... lol
That stuff sounds expensive. I run a lucas oil stabiliser in my cars with high km's, its like liquid vaseline,100% petroleum. seems to keep things coated while shut down, making for quieter starts and operation and picks up oil pressure. I'd never run anything thinner than specified and I also wouldn't take too big of a step up either it's likely to upset things that aren't upset yet...
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| cjh |
|
|||
|
I use Mitsubishi engine oil....15W50....works very well....only about $30 for a 5lt bottle.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Winkk |
|
||
|
Use Atomic anti pump lifters for it.
Done. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 102 guests |
